Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
1 8 Standard Timer Controls 6.2 9 Recipe Timer Controls 6.2 10 Bowl Placement 6.3 11 Agitator 6.4 11 Prepare for Mixing 6.5 12 Operating Notes 6.6 12 Standard Timer Operation 6.7 12 Recipe Timer Operation 6.7 14 View Recipe 6.7 15 Programming Recipe Timer 6.7 15 Unloading 6.8 17 Guard Wire Cage 6.9 17 Remove and Cleaning the Guard Wire Cage 6.10 18 Re-Fitting the Guard Wire Cage 6.11 18 Mixing Capacity Chart 6.12 19 Agitators and Attachments 6.13 21 2 Using the Attachment Facility Using the Attachment Facility 22 Splash Cover 6.13.2 22 Bowl Scraper Attachment 6.13.3 22 Cleaning 6.14 22 Cleaning after Use 6.14.1 22 Installation and commissioning 6.15 23 Overall Dimensions Fig. 15 23 Technical Information Table 1 24 Unpacking and Handling 6.16 24 Location 6.17 25 Electrical Installation 6.18 25 Operator Training 6.19 26 Mixer Maintenance 7.0 26 Lubrication 7.1 26 Slideways 7.1.1 26 Planetary Seal 7.1.2 27 Bowl Locking Mechanism 7.1.3 27 Adjustments 7.2 27 Agitator Clearance 7.2.1 27 To Measure the Agitator Clearance 7.2.2 27 Interlock Safety System 7.3 28 Fault Finding 8.0 28 Recommended Spares 9.0 29 Notes 10.0 31 Service Contact Numbers 11.0 32 © Hobart 2005 3 4 1.0 SAFETY INFORMATION. The procedures and precautions contained in this manual are understood to apply to the machinery only when it is used in the prescribed manner. If the machinery is used other than in the recommended manner, the operator will be responsible for his/her own safety and for the safety of the other persons who may be involved. The information in this manual has been prepared to assist the operator to understand, maintain, and operate the mixer. In order to prevent accidents, read, understand and follow all the precautions and warnings contained in this manual before installation or operating for the first time. This manual must be studied to obtain a clear understanding of the mixer and its capabilities. 1.1 SAFETY GUIDELINES. Ensure sufficient precautions are observed during manual handling of the mixer particularly when moving into position on installation. Reference must be made to manual handling regulations. The mixer weights are given in Table 1. • Do not hose or pressure clean this appliance. It is vital to adhere to the cleaning instructions detailed in section 6 of this manual. • Do not remove any covers or loosen any fittings whilst the machine is operating. • Ensure this manual is kept in an easily accessible place for future reference near the mixer. • All operators must be trained in the safe operation of the mixer and attachments. • Ensure that the power supply cord has been unplugged before attempting to service or move the mixer. • Rotating machinery and electricity are potentially hazardous and may cause injury if sufficient precautions are not taken prior to operating or servicing the machine. • Always have your mixer and attachments regularly serviced; at least twice a year, depending on frequency of use. • When mixing products that develop dust care must be taken. Mix the ingredients using the STIR facility until the dust is eliminated. • Exposure to dust (including flour) may be harmful to health causing rhinitis (running noses), watering eyes and possibly occupational asthma. 1.2 WARNING SYMBOLS. To identify the safety messages in this manual, the following symbols have been used The "Warning" symbol is found primarily where the corresponding information is important for the safe use of the machinery. The electrical hazard symbol is used when there are risks of an electrical nature. Prior to servicing the machinery, always disconnect the power cable from the mains supply. 1.3 1.3 Installations and repairs which are not carried out by Authorised technicians or the use of other than original spare parts, and any technical alterations to the machine, may affect the warranty set out in the standard conditions of sale. 2.0 FOREWORD. Hobart reserves the right to alter the design of their products without prior notice. Whilst every effort is made to ensure this publication reflects the latest design, the Company cannot guarantee full compliance. Take pride in your HL200 Mixer - keep it clean and in good mechanical and electrical condition. 3.0 GENERAL INFORMATION. The information and instructions contained in this manual may not cover all details or variations in the equipment, nor provide for every eventuality to arise with installation, operation, or maintenance. If additional information is required, please contact your local Hobart office. The HL200 Mixer is designed to mix food products as detailed on the specification chart (Section 6.12, page 19). The Legacy 20-litre mixer is a bench-type mixer which features a SmartTimer™, a manual bowl lift and a #12 attachment hub as standard equipment. With the use of special agitators, a 12 litre bowl may be used on the HL200 mixer. The machine is rated to operate on the electrical supplies shown in Table 1, page 24. The Mixer is fitted with a "no volt release" safety fe...