Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
The maximum operating time on settings “ 1- 3” in the " Hi" range is 30 seconds non- stop with beaters, dough hooks, or whisk. Beaters, Dough Hooks, Whisk: Select the attachment according to the type of mixing required. Make sure that the mixer is unplugged from power source and speed selector is set on ” 0" before inserting or removing beaters, dough hooks or whisk. Beaters: Use for liquid mixes such as creams, egg- whites, confectionery doughs, etc. insert stem end of beaters (one at a time) into the openings in the mixer. Insert the beater with the gear in the larger of the two holes. The gear on the beater must sit below the surface of the mixer housing. To ease the inserting of the beaters, a slight twisting motion will aid in engaging the beater drive tabs. Install the second beater in the same manner as above. Dough hooks: Use for light doughs. Insert dough hooks in the same way as beaters above. See installing instructions for beaters above. Always use both dough hooks. Never try to work with one beater and one dough hook at the same time. Do not use dough hooks at low speeds as this may cause motor to overheat. When using dough hooks for heavy or thick dough, use only high speed (3) from the beginning to prevent the motor from overheating (blocking). Warning: Never operate the appliance without all the parts in place. Make sure that all parts are properly assembled before turning on the unit. Bottom View Large Opening Gear 4 OPERATING INSTRUCTIONS To Operate the Hand Mixer • Gently pull the power cord from the main unit. Caution: Do not pull with force on the power cord or you will damage the rewinding feature and void the warranty. When rewinding, always hold the plug to avoid cord whipping. • Before plugging in the unit, fit the desired attachment required for the mixing operation to be carried out. • Insert the beaters or the dough hooks one at a time by pressing them gently upwards until they are fully fitted and you hear a click. Make sure that the attachment with the gear is inserted into the larger hole opening. ( See illustration below.) Bottom View Large Opening Gear To Operate the Hand Mixer (cont.) • When you have inserted the attachment that you desire, plug in the mixer. • Pick up the mixer and use your thumb to set the speed selector and the Hi/Lo range selector to the setting that you desire. Warning: The unit is designed for intermittent use. The maximum operating time on settings “ 1-3” in the " Lo" range is 10 minutes non-stop with beaters, dough hooks, or whisk. The maximum operating time on settings “ 1- 3” in the " Hi" range is 30 seconds non- stop with beaters, dough hooks, or whisk. • We suggest that you begin at the highest speed to prevent the motor from blocking. • Ensure that the beaters are completely free to move in your mixture. • Return to "0" setting when you have finished using the mixer or you wish to stop. • To remove the attachments from the mixer, press the beater release button. This button only works when the mixer is on the "0" speed setting. • To rewind the power cord, push the cord rewind button. Caution: When rewinding, always hold the plug to avoid cord whipping. SPEED SETTINGS HI/LO RANGE SETTINGSSPEED SELECTOR"LO" "HI" "0" OffOff"1" LowestHigh- Middle"2" LowHigh"3" Low- MiddleHighest 5 OPERATING INSTRUCTIONS How To Attach the Hand Mixer to the Stand • The stand for the Power Mixer has two tabs on top. ( Fig. 1) • The power mixer has two slots next to the holes for inserting the attachments. (Fig. 2) • Hold the power mixer in your right hand at an angle. Slide it from left to right securing the two tabs on the stand into the two slots on the power mixer. (Fig. 3) • Push the power mixer down on the stand to engage the lock ( Fig. 4) that secures the power mixer to the stand. ( Fig. 5) Note: To lock the power mixer onto the stand more easily, push the lock release button as you are lowering the power mixer down onto the stand. (Fig. 6) Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5 Fig. 6 6 OPERATING INSTRUCTIONS How To Remove the Hand Mixer to the Stand • To remove the power mixer from the stand, push the lock release button and lift the power mixer upwards. ( Fig. 7) • In order to lift the power mixer while it is still on the stand, push the locking button and pull the power mixer upwards. ( Fig. 8 & 9) Fig. 7 Fig. 8 Fig. 9 CLEANING & STORAGE • Ensure that the mixer is unplugged and switched off before removing and cleaning the attachments. • Wash the beaters and glass bowl in warm, soapy water or dishwasher. • Clean the stand by wiping with a damp cloth. • Never immerse the power mixer in water or any other liquid. • Push the cord rewind button while holding the plug for the cord to rewind. • You can store 1 set of the attachments on the side of the stand for easier storage. Caution: Do not pull with force on the power cord or you will damage the rewinding feature and void the warranty. When rewinding, always hold the plug to avoid cord whipping. ONE (1) YEAR LIMIT...