Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
HOW TO PREVENT IT • Inspect the high-pressure hose regularly. Replace the hose immediately if it is damaged, worn, has melted from contacting the engine, or shows any signs of cracks, bubbles, pinholes, or other leakage. Never grasp a high- pressure hose that is leaking or damaged. • Never touch, grasp or attempt to cover a pinhole or similar water leak on the high-pressure hose. The stream of water IS under high pressure and WILL penetrate skin. • Never place hands in front of noz zle. • Direct spray away from self and others. • Make sure hose and fit tings are tightened and in good condition. Never hold onto the hose or fittings during op er a tion. • Do not allow hose to contact muffler. • Never attach or remove wand or hose fittings while sys tem is pressurized. • To relieve sys tem pres sure, shut off engine, turn off water sup ply and pull gun trigger until water stops flowing. • Use only hoses and accessories rated for pressure higher than your pressure washer's PSI. RISK OF INJURY FROM SPRAY WHAT CAN HAPPEN • High-velocity fluid spray can cause objects to break, propelling particles at high speed. • Light or unsecured objects can become hazardous projectiles. HOW TO PREVENT IT • Always wear ANSI-approved Z87.1 safety glasses. Wear protective clothing to protect against accidental spraying. • Never point wand at or spray people or animals. • Always secure trigger lock when wand is not in service to prevent accidental operation. • Never permanently secure trigger in pull-back (open) position. A16617 4- ENG RISK OF UNSAFE OPERATION WHAT CAN HAPPEN HOW TO PREVENT IT • Unsafe op er a tion of your pressure • Do not use chlorine bleach or any wash er could lead to se ri ous in ju ry other corrosive compound. or death to you or others. • Be come fa mil iar with the op er a tion and con trols of the pressure washer. • Keep operating area clear of all persons, pets and obstacles. • Do not operate the product when fatigued or under the influence of alcohol or drugs. Stay alert at all times. • Never defeat the safety fea tures of this prod uct. • Do not op er ate machine with missing, broken or un au tho rized parts. • Never leave wand unattended while unit is running. • If proper starting procedure is not • If engine does not start after two followed, engine can kickback pulls, squeeze trigger of gun to causing serious hand and arm injury. relieve pump pressure. Pull starter cord slowly until resistance is felt. Then pull cord rapidly to avoid kickback and prevent hand or arm injury. • The spray gun/wand is a powerful clean ing tool that could look like a toy to a child. • Keep chil dren away from the pressure washer at all times. • Reactive force of spray will cause • Do not over reach or stand on an gun/wand to kickback, and could unstable support. cause the op er a tor to slip or fall • Do not use pressure washer while or misdirect the spray. Im prop er standing on a ladder. control of gun/wand can result in • Grip gun/wand firmly with both in ju ries to self and others. hands. Expect the gun to kickback when triggered. 5 - ENG A16617 RISK OF INJURY OR PROP ERTY DAMAGE WHEN TRANSPORTING OR STORING WHAT CAN HAPPEN HOW TO PREVENT IT • Fuel or oil can leak or spill and could result in fire or breathing hazard. Se rious in ju ry or death can result. Fuel or oil leaks will dam age carpet, paint or oth er surfaces in ve hi cles or trailers. • If pressure washer is equipped with a fuel shut-off valve, turn the valve to the OFF position before transporting to avoid fuel leaks. If pres sure wash er is not equipped with a fuel shut-off valve, drain the fuel from tank before trans port ing. Only trans port fuel in an OSHA-approved container. Al ways place pressure washer on a protective mat when transporting to protect against dam age to vehicle from leaks. Re move pres sure washer from vehicle immediately upon arrival at your destination. RISK OF BURSTING WHAT CAN HAPPEN HOW TO PREVENT IT • Over inflation of tires could result in serious injury and property damage. • Use a tire pressure gauge to check the tires pressure before each use and while inflating tires; see the tire sidewall for the correct tire pressure. NOTE: Air tanks, compressors and similar equipment used to inflate tires can fill small tires similar to these very rapidly. Adjust pressure regulator on air supply to no more than the rating of the tire pressure. Add air in small increments and frequently use the tire gauge to prevent over inflation. RISK OF HOT SURFACES WHAT CAN HAPPEN HOW TO PREVENT IT • Con tact with hot sur fac es, such as engines exhaust com po nents, could result in se ri ous burn. • During op er a tion, touch only the control surfaces of the pres sure washer. Keep children away from the pres sure washer at all times. They may not be able to recognize the haz ards of this product. RISK OF INJURY OR PROP ERTY DAMAGE WHEN TRANSPORTING OR STORING WHAT CAN HAPPEN HOW TO PREVENT IT • Fuel or oil can leak or spill and could result in fire ...
Este manual também é adequado para os modelos :Equipamento de lavagem - Excell XR2625 (2.94 mb)