Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
.Unit components Please fold out illustration page at the front 1 Nozzle rest 2 Handle 3 High-pressure outlet 4 Water connection 5 Manometer 6 Oil level display 7 Oil reservoir 8 Hood 9 Unit switch 10 Fastening screw for hood 11 Hose rest 12 Handgun support 13 Nozzle 14 Marking of the nozzle 15 Spray lance 16 Pressure/flow control 17 Hand-held spray gun 18 Safety catch of hand-held spray gun 19 Lever of hand-held spray gun 20 High-pressure hose 21 Push-handle 22 Cable holder 23 Detergent metering valve 24 Detergent suction hose with filter and screw cap 25 Bottle holder for detergent For your safety Before you use the cleaner for the first time, read these operating instructions and take special note of the accompanying booklet "Safety Instructions for High-Pressure Cleaners" No. 5.951-949. Symbols on the machine High-pressure jets can be dan gerous if improperly used. The in the drinking water supply net The appliance is not suited for use jet must not be directed at persons, animals, live electrical equipment or ppliance itself. work. It is necessary to install a suitable system separator from Kaercher, if the device is to be used in the drinking water supply network. Use of the cleaner Use this unit exclusively for – cleaning with high-pressure jet and detergent (e.g. cleaning of machines, vehicles, buildings, tools), – cleaning with high-pressure jet without detergent (e.g. cleaning facades, terraces, gardening equipment). For stubborn dirt we recommend the dirt blaster as an optional accessory (for HD ... Plus included in the delivery). English Safety features Overflow valve with pressure switch On reducing the flow rate with the pressure and flow control, the relief valve opens and part of the water runs back to the suction side of the pump. If the lever of the hand-held spray gun is released, the pressure switch switches the pump off. If the lever is retracted, the pressure switch switches the pump on again. Safety valve The safety valve opens when the admissible operating excess pressure is exceeded; the water flows back to the pump suction side. Overflow valve, pressure switch and safety valve are present in the factory and are sealed. Adjustments are made only by Customer Service. Protection of the environment, disposal The packaging material can be recycled. Please do not place the pakkaging into the ordinary refuse for disposal, but arrange for the proper recycling. Old appliances contain valuable materials that can be recycled. Please arrange for the proper recycling of old appliances. Batteries, oil, and similar substances must not enter the environment. Please dispose of your old appliances using appropriate collection systems. Preparing the unit for use Unpack the unit – When unpacking the unit, check the contents of the packaging. If there has been any damage in transit inform the dealer. – Do not dispose of the packaging with the household rubbish, hand it in at the appropriate collection point for recycling. Check the oil level • Read the oil level displayed while unit is at a standstill. The oil level must be above the two indicators. Activate the oil reservoir vent • Unscrew the fastening screw of the hood and remove the hood. • Cut off the tip on the cover to the oil reservoir. • Fasten the unit cover. Mount the accessories • Mount nozzle on the spray lance (see markings on the top of the setting ring). • Fit the spray lance to the hand-held spray gun with pressure and flow control. • Screw on high-pressure hose to the high- pressure outlet. Switching on the unit Electrical connection Caution! The appliance may only be connected to alternating current. The voltage must correspond with the type plate on the appliance. Caution! Use if required an extension cable with sufficient cable cross-section (refer technical details)and always fully unroll the cable from the cable drum. English Unsuitable extension cables can be hazardous. Only use extension cables outdoors which have been approved for this purpose and labelled with a sufficient cable cross section: For connected loads see model rating plate/ Technical Specifications. Caution! It is essential that the unit is connected to the power supply by means of a plug. An inseparable connection to the power supply is prohibited. The plug is used to disconnect from the mains. Check the power cord with mains plug for damage before every use. If the power cord is damaged, please arrange immediately for the exchange by an authorized customer service or a skilled electrician. The appliance may only be connected to an electrical supply which has been installed in accordance with IEC 60364. The minimum fuse rating required at the socket outlet is (see technical specifications). The plug and coupling of the extension cable used must be watertight. Water connection/Suction feed operation Connection to water main Caution! Pay attention to the regulations of the water supply company; according to DIN 1988, the unit may not be connected direct to the pub...
Este manual também é adequado para os modelos :Equipamento de lavagem - HD 7/10-4 M (628.18 kb)