Table 1 HP 1910 Switch Series models Product code HP description Alias Non-PoE JE005A HP V1910-16G Switch V1910-16G JE006A HP V1910-24G Switch V1910-24G JE009A HP V1910-48G Switch V1910-48G JG348A HP 1910-8G Switch 1910-8G PoE JE007A HP V1910-24G-PoE (365W) Switch V1910-24G-PoE (365W) JE008A HP V1910-24G-PoE (170W) Switch V1910-24G-PoE (170W) JG349A HP 1910-8G-PoE+ (65W) Switch 1910-8G-PoE+ (65W) JG350A HP 1910-8G-PoE+ (180W) Switch 1910-8G-PoE+ (180W) IMPORTANT: For regulatory identification p

1. Install two 5/8-inch (15.875 mm) Number 12 wood screws, (included) into the mounting surface, positioned 5.5 inches (140mm) apart for the 18108 and 1810-8G Switch, or positioned 10 inches (254 mm) apart for the 181024 and 1810-24G Switch. Use the wall anchors if necessary. 2. Position the switch over the screws, and then slide it down to lock it in place. Installing the Switch Installation Procedure Under-Table Mounting You can mount the switch under a wood table. Ca ut ion The switch should

Cupertino, CA 95015-4010 USA Product Name: Model Number(s): Product Options: Product Name: Model Number(s): Product Options: Wireless Keyboard and Mouse 5219URF - Keyboard M971 U (M1) — Mouse for wireless kit 5219URF (RX1) — Receiver for wireless kit All Wireless Mouse M971 U (M2) — Wireless mouse 5219URF (RX2) — Wireless mouse receiver All conforms to the following Product Specifications: Safety: EN 60950:1992 + A1, A2, A3, A4, A11 EMC: FCC Title 47 CFR, Part 1 5 Class B, Subpart C

¦DD¦, MM, SS.SS< 1 . 10 100 , 0 . MM, SS.SS x < 1 . 10 100 x y x > 0 : –1 . 10100 < y log x < 100 x = 0 : y > 0 x < 0 : y = n, 1/(2n+1) where n is an integer but –1 x 10100 < y 1 log .x. 100 x Y y > 0 : x . 0, –1 x 10100 < x 1 log y < 100 y = 0 : x > 0 y < 0 : x =2n+1, l/n where n is an integer other than 0 but –1 x 10100 < x 1 log . y . 100 a b/c Input:The integer, numerator, denominator and fraction symbols must in total be no more than 10 digits. Result:Displayed as a fraction when the intege

© Copyright 2015 HP Development Company, L.P.Please download and install software from http://www.hp.com/support.Transfira e instale o software em

L&TT 5.0 comes in two parts; the LTT Service is installed on the backup or archive server while the Web GUI can be installed on any supported Windows computer. This allows you to run the GUI on your laptop or desktop without having to remotely log in to your server to run diagnostics. L&TT 5.0 also provides device monitoring, giving you a continuous assessment of the health of your drives and media. Figure 1 L&TT 5.0 architecture 4 Overview 2 Installing L&TT 5.0 The LTT Service and WebGUI are do