Assessments - 2, GPA: 5
(
)
)
|
Facilidade de uso
The desired function will be highlighted in red. “+” And “-“ buttons are used to adjust the desired function. Note: If a button has not been pressed for 5 seconds, then the OSD menu is automatically hidden again. -5 Invoking OSD menu Briefly press the menu button on top of the monitor. The OSD menu “ Navigation settings” is displayed and Volume will be highlighted in Red. In the OSD menu you can adjust the following settings: * Volume: Adjust Volume level of the built-in monitor loudspeaker * Brightness: Adjust brightness of the display. * Display mode: Screen display; the selected setting is indicated in red. Possible selections include: “Full Screen “ (16:9) “Normal” (4:3) Adjusting settings 1. Press the Menu button until the desired function appears in red. 2. Adjust the desired setting with the + or – buttons. If necessary, invoke the next menu item by pressing the Menu Button. -6 * If you use the built-in monitor loudspeaker, leave the volume level in the OSD menu on the middle setting. Adjust the volume level for the audible messages of the navigation system with the + or – buttons on the remote control. * The volume level of the built in monitor speaker can also be set without invoking the OSD menu. Press the + or – button on the monitor. The display automatically changes to the menu for setting the volume. Set the volume desired by pressing the + or – buttons. Set up Menu The monitor offers you the possibility of performing the following settings in the Setup Menu: * Brightness Control: Day/Night * Loudspeaker: On/Off -7 Invoking the Setup Menu Press all three buttons at the top of the monitor at the same time. The Setup Menu appears Brightness will be highlighted in red. Press + or – to select Day or Night highlighted in red. Day selection will be bright, Night will be dark. Note: If brightness control is set for Night, It will return to Day mode whenever the Ignition is turned off for more then 30 seconds. 1. Press the menu button to highlight Loudspeaker in red 2. Press + or – button to select ON or Off. -VIDEO MENU (AUX cable : Connection, Navigator cable : Connection) * VOLUME : This function is used to control the audio volume. * BRIGHTNESS : This function is used to control the overall brightness of the picture displated on the monitor. * COLOR : This function is used to increase or decrease the overall color saturation of the picture displayed on the monitor. * CONTRAST : This function is used to increase or decrease the overall contrast of the picture displayed on the monitor. * TINT : This function is used to increase or decrease the overall color schme of the picture displayed on the monitor. * DISPLAY MODE (NORMAL, FULL SCREEN, CINEMA) : Make reference to 9 page. . -8 Display Mode 1. Press MENU to get the On Screen Display (OSD). 2. Select Display Mode. 3. Press the + or the - to switch the screen aspect ratio. FULL SCREEN: 16:9 picture is fully displayed. CINEMA : Picture is displayed with uniform vertical enlargement. NORMAL...
Este manual também é adequado para os modelos :Monitores - LCM58N (196.67 kb)
Monitores - LCM5N (196.67 kb)
Monitores - LCM5N (196.67 kb)