Fabricante : Audiovox
Arquivo Tamanho: 85.62 kb
Arquivo Nome :
|
Facilidade de uso
Once the desired adjustment bar is displayed, use the -/+ buttons to adjust the selected function. The display will automatically turn off if no adjustments are made within 6 seconds, or if any other button is pressed. 37. (-) Button* Use this button to decrease the level of the selected picture adjustment. 38. (+) Button* Use this button to increase the level of the selected picture adjustment. 39. NUMBER Buttons*** Allows the user to enter numbers 0 to 9 for direct access to TV channels. 40. IRTA ON/OFF Button Turn Infrared Transmitter power ON/OFF for IR Wireless Headphone Channel A. 41. IRTB ON/OFF Button** 42. EJECT ( )Button** -9 128-7288 9 of 16 Turning the VOH1012 On or Off 1. Sliding the screen release lock forward will unlock the LCD screen and it will drop down slightly. Pivot the screen downward until a comfortable viewing angle is reached. The internal hinge friction will hold the screen in position while the system is in use. 2. Pressing the power button on the unit or the remote control will turn the system on or off alternately. When in use the internal backlighting will illuminate the controls. 3. After the unit has been turned on. Adjust the viewing angle by pivoting the screen to optimize the picture quality. 4. Remember to turn the unit off and pivot the LCD to the locked position when not in use. Dome Light Switch Overhead Dome Lights The lights integrated into the VOH1012 are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times, and the auto position will allow the lights to turn on and off with the vehicle’s interior lighting. Refer to the Installation Manual for the wire connections. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery. -10 128-7288 10 of 16 Remote Sensor Eye Remote Sensor The VOH1012 incorporates two Infrared sensors which relay signals from the remote control to allow the unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function allows control of auxiliary equipment such as an Audiovox DVD Player. The infrared sensor can relay signals from most manufacturer’s remote controls to its respective component connected to the AV 1or AV 2 input. In this case you must use the remote control supplied with the component. Accessories Wireless Headphones The VOH1012 includes a built-in infrared transmitter for use with Audiovox wireless headphones (Part Number MVIRHS). The volume can then be adjusted using the controls on each headset. Any number of wireless headphones may be used but they must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your Audiovox wireless headphones. Wireless FM Modulator The VOH1012 is equipped with buit-in wireless FM Modulator*, that allows you to listen to the VOH1012 audio signal b...
Este manual também é adequado para os modelos :Monitores - VOH1012 (85.62 kb)
Monitores - VOH1012 S (85.62 kb)
Monitores - VOH1012P (85.62 kb)
Monitores - VOH1012 S (85.62 kb)