Only the screen image is displayed, and operations such as input and selection cannot be performed on the screen. To close an image that has been saved and display the previous screen: 1 Press Menu button. 2 Select [General] - [Connect], then select [OK]. NOTE If you want to playback the currently displayed screen later, you can save the screen data onto the memory (up to 100 images)*1. *1 The number of the data that can be saved is different according to the image. Press Capture button. The currently displayed screen is saved, and is added at the end of the already-saved images. Displaying Saved Images 1 Press Menu button. 2 Select [General] - [OfflineView], then select [OK]. The saved image and the following panel will be displayed. Moving to the four corners of the screen Displaying the previous image (high-speed mode) No 016 Total 038 Displaying the next image (The same operation is possible by pressing the Capture button.) Delete << >> < > Capture Button Menu Button Image number The number of images saved Delete the image data Displaying the next image (high-speed mode) 38 Troubleshooting When a problem occurs, refer to this page. If a problem appears to be related to a software application, read the software related manual. If you still cannot troubleshoot the problem, contact Panasonic Technical Support. No display after powering on Has the computer or wireless display been set to the power-saving mode? To resume operation of your computer from the condition the power of the display is off (for energy conservation purposes), touch the screen. An afterimage appears If an image is displayed for a prolonged period of time, an afterimage may appear. Set the screensaver. “Connection timeout” is displayed Confirm the IP address, subnet mask, network type, and SSID settings on both the computer and the wireless display. Confirm the operation of the wireless LAN on the computer. The wireless LAN on the computer side is compatible with 802.11b and 802.11g, but if there is a possibility of interference from other devices on the network, set the computer’s wireless LAN to 802.11b only. If your computer and the wireless display do not power off normally due to a reason such as a network error, it may take two or three minutes to reconnect. Wait for a moment, then connect again. “No server found” is Put the wireless display close to the computer. displayed Confirm that is on the taskbar. Confirm the IP address of the computer that has been set on the wireless display. “Authentication failed” is displayed Confirm the password for both the computer and the wireless display. “Too many clients” is displayed Disconnect the wireless display during operation and reestablish the connection. E (To next page) 39 Troubleshooting E “Illegal data received” or Confirm whether the network is working properly or “Initial image receiving not. timeout” is displayed Confirm the AES key length setting with the following procedure. Windows XP [start] -[All Programs] - [Panasonic] - [MeiWDS Setup Utility] Windows 2000 [Start] - [Programs] - [Panasonic] -[MeiWDS Setup Utility] Press the Menu button, select [Wireless], and confirm the AES Encryption setting. Restart the computer. “PC’s display mode The connection has been terminated because the display changed” is displayed mode of the computer was changed. Stop using the application or screensaver that changed the display mode, select [Reconnect] on the wireless display and then reconnect. Software keyboard has been closed Select [Software Keyboard] with the following procedure. Windows XP [start] - [All Programs] - [Panasonic] - [Software Keyboard] Windows 2000 [Start] - [Programs] - [Panasonic] - [Software Keyboard] An afterimage appears High-precision and advanced technologies are (i.e., green, red, and blue necessary in the production of color liquid crystal dots remain on the displays (color LCDs). Therefore, if 0.002% or less of display) or there are dots the picture elements either fail to light or remain not displaying the correct constantly lit (that is, more than 99.998% of elements colors are functioning properly), no defect is considered to exist. 40 Specifications Model No. CF-VDW07CH LCD Type 8.4 Type (TFT) Displayed Colors 256 colors (800 . 600 dots) Touchscreen Anti-Reflection, Stylus (included) touch capable Interface Serial Port Dsub 9-pin male Battery Packs Li-ion 7.4 V, 1.7 Ah Operating Time*1 Approx. 1.5 h - 2.5 h Charging Time*1 Power On: Approx. 5.0 h Power Off: Approx. 2.0 h AC Adaptor*2 Input 100 V - 240 V AC, 50 Hz / 60 Hz Output 16 V DC, 2.5 A Power Consumption*3 Approx. 9 W*4 / Approx. 20 W*5 Physical Dimensions222mm . 162mm . 14.5 mm - 31.5mm (excluding (W . H . D) protrusion) {8.7 " . 6.4 " . 0.6 " - 1.3 "} Weight Approx. 715 g {1.6 lb.} Environment Operation Temperature: 5 °C to 35 °C {41 °F to 95 °F} Humidity: 30% to 80% RH (No condensation) Storage Temperature: -20 °C to 60 °C {-4 °F to 140 °F} Humidity: 30% to 90%...
)
