Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
Signal connector: BNC connector Sync on green system Connect the signal cable to RED, GREEN (sync ongreen) and BLUE BNC connectors. Composite sync system Connect the signal cable to RED, GREEN, BLUE and H-SYNC (H / V composite) BNC connectors. Separate sync system Connect the signal cable to RED, GREEN, BLUE and H-SYNC and V-SYNC BNC connectors. Note : If your computer’s video output is over 110 MHz, it is recommended that it be used with the BNC connectors. -8- ^ External View Dimensions Width Height Depth Base diameter Height without stand 409 mm (16.1") 413 mm {16.3") 381 mm (15.0") 0 240 mm (<}> 9.4") 370 mm (14.6") Pan / Tilt range Up Down Left, right 13 degrees 4 degrees 90 degrees each Pedestal removal Observe the following instructions if the unit is to be used with the display stand removed. Repeat this procedure in the reverse order if the display stand is to be reattached. D Lay the screen down onto a soft object (cushion,etc.) to avoid scratching. □ Grasp the bottom of the display stand as indicated in the illustration. B Apply pressure with your fingers to the area shown in the illustration and lift the stand slightly in an upward direction. This will release the lock. □ Once the lock has been released, remove your fingers and firmly lift upwards at an angle. □ This will separate the stand from the main unit. B Place the unit on top of the computer to be used or on a tabletop. Store the display stand in the box or other receptacle in which the computer was purchased. -9- Operation Basic operation Displays main menu. Exits menus. Selects menu item. To scroll through menu item. To adjust level of selected item. Menu screen The functions that can be adjusted for this unit are displayed as icons. 1) Press the □ key to return to the menu screen. 2) This is modified by pressing the 3 and B keys at the front. 3) Press the [D key to enter the adjustment screen. Ю -ф- Ш о о g ю Ф □□□ OSD □□□ Я Contrast Contrast Brightness Size & Pos. Geometry Rotation Color Temp Recall Video Level H. Moire V. Moire Language OSD Position Degauss Signal Operation procedure Horizontal position adjustment 1. Press the [Tj key to display the menu. m < > in fi 2. Press the B key to select the Size & Pos. from the menu screen. Press the [H key to display the menu. 3. Press the front 3 or B keys to reach the desired condition. □ < > ID nn 4. Press the [Q key to save the settings to memory and complete the adjustments. Press the 0 key once more to clear the menu screen. D3 < > DD M Ш О о д О ю Ф ?£ SIB Я Cont rast э т О о аз о ю ф -м SIS я Size &Ро s. H. Position 50 H. Position 70 о ёИ О Q О О ю Ф ** ?t ив Я Size & Pos. -10- Adjustments Self-Test menu (No Signal screen) This display indicates that the monitor is operating normally. When one of the following conditions occurs, press one of the 4 operation keys to call the appropriate display. No Signal fH —. — kHz fV —.— Hz Error fH 105.0kHz fV 80.0 Hz No signal (the computer is not connected, the mains power to the computer is disconnected or the input connector in use may be deselected, see Page 13 Signal for instructions.) The horizontal or vertical sync, signal are outside of the permitted range (the value of the horizontal sync, signal will be displayed in red and the value of the vertical sync, signal will be displayed in white.) Adjustment menu Adjust the screen contrast to match the brightness level in the room. Pressing the [2] key toggles between brightness and contrast. Direct operation Even if the menu screen does not appear, the contrast can be adjusted by pressing the H or B key. If the 3 and B keys are pressed at the same time, the maximum level (100) will be set. -£2- Brightness I Adjust the brightness to match the brightness level in the room so that the level will be easy to see. Pressing the d] key toggles between contrast and brightness. Note: If the 3 and B keys are pressed at the same time on the Brightness adjustment screen, the standard level (50) will be set. Size & Pos. ! Press the [D key to select the zoom / horizontal position / horizontal size / vertical position / vertical size adjustments. Press the 0 key to save the adjustment. E9 Zoom Both the horizontal and vertical size of the image can be adjusted at the same time; however, the aspect ratio cannot be changed. Press the 3 key to make the image smaller, the B key to make it larger. rO H. Position ! The horizontal position of the image can be adjusted. Press the 3 key to move it to the left, the B key to move it to the right. H H. Size ! The horizontal size of the image can be adjusted. Press the 3 key to make the image smaller, the B key to make it larger. Note: Setting the image in the center of the screen to start will make the adjustment easier. [B] V. Position ' The vertical position of the image can be adjusted. Press the 3 key to make it downwa...