Assessments - 3, GPA: 4.7
(
)
)
|
Facilidade de uso
Sliding the screen release lock forward viewing will unlock the screen and it will drop down slightly. (Pivot the screen downward until a comfortable angle is reached). After the unit has been turned on and displaying a picture, adjustment to the viewing angle can be made by pivoting the screen to optimize the picture quality. The internal friction detent will hold the screen in position while the system is in use. 2. Pressing the power button on the pod will alternately turn the system on When in use the internal back lighting the controls. 3. Remember to turn the unit off and pivot the LCD to the locked position when not in use. -9- OPERATION Overhead Dome Lights This lights integrated into the LCM0802TV are controlled by a three position slide switch. Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times and the auto position will allow the lights to turn on and off with the vehicle’s interior lighting. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery. Dome Light Switch Remote Sensor The LCM0802TV incorporates an infrared sensor, which relays the signals from the remote control to allow the LCM0802TV and VCP to be controlled simply by pointing it’s remote control at the remote sensor. This provides control of auxialiary equipment such as an Flexvision Video Cassette Player. The infrared sensor can relay signals from any manufacturer’s remote control to it’s respective component connected to the Video 1 and 2 inputs, such as a DVD player. In this case you must use the remote control supplied with the DVD player. Remote Sensor -10- OPTIONAL ACCESSORIES Wireless Headphones The LCM0802TV includes a RF transmitter (P/N WUX) for use with optional Flexvision wireless headphones. Tuning the headphone switch on, and wearing them activates the internal micro switch, (which includes a tuning knob to tune into the preset frequency on the RF transmitter), which will activate the internal RF receiver and the volume can be adjusted separately with the controls on the headset. See the documentation accompanying your Flexvision wireless headphones. Auxiliary A/V Stereo Inputs Jack The LCM0802TV may be equipped with an auxiliary A/V stereo input connector (optional). These inputs are provided to facilitate the temporary connection of optional audio/video equipment, such as a camcorder or video game system. To play a source with these inputs, an RCA patch cord is required to connect the audio/video signals to their respective jacks. Mono audio sources will require the use of an RCA Y-cable (P/N 0892165) to connect to both right and left inputs, if patch cords are installed into the AUX inputs, the AUX INPUT 2 will be temporarily bypassed. Once the connections have been made, turn the LCM0802TV on and press the source button on the LCM0802TV or the TV/Video button on the remote control until “Video 2” is displayed on the screen. The unit will now play the audio and video signals from the accessory connected. The remote control will not operate the accessory components. LCM0802TV Jack Panel HEADPHONES AUDIO R AUDIO L VIDEO HEADPHONES -11- Video Output The LCM0802TV provides a video output for an optional video monitor(s). This output will provide a video signal that duplicates the signal displayed by the LCM0802TV to an additional monitor or video display. Please see your installer for more information. Flexvision Video Cassette Player (Aux Video 1) In most installations a VCP will be connected to the “Video 1” input. To view a video cassette, turn the AVP7000/ AVP7285 on and press the source button on its control panel or the TV/Video button on the remote control unit until “Video 1” is displayed on the screen. The VCP may also be operated with the remote or the buttons on its face. Inserting a tape into the VCP will turn it on and automatically activate the play mode. If a rewound tape had been loaded into the VCP, prior to its activation press play on the VCP or the remote control to view the tape. For more information see the owner’s manual accompanying your VCP. -12- TYPICAL SYSTEM CONNECTIONS 49 MHz FM Transmitter 15 16 17 13 14 18 11 1 2 3 4 5 6 12 10 7 8 9 TOFM TRANSMITTER SPEAKER OR HEADPHONE CONNECTION LINE OUT-R LI NE OUT-V LINE OUT-L TWO DOME LIGHT’S CONNECTION POWER(+ 12V) POWER(GND) White RCA( Audio Left) Red RCA( Audio Right) Yellow RCA(Video) 4 PIN Power Connector 2 PIN IR Connector AccessoryHarness White Entry Switch/ Negative Black - Constant + 12VDC/ Dome Red- Chassis Ground Negative Dome Light Switching White Entry Switch/ Positive Black Chassis Ground Red- Constant + 12VDC/ Dome Positive Dome Light Switching PIN 1 – Power/ Red PIN 2 – Power GND/ Black PIN 3 – Dome Light Auto/ White PIN 4 – Light GND/ Black PIN 5 – Dome Light B+ / Red PIN 6 – Line Out ( L) / White PIN 7 – Spk Out ( R) / Green PIN 8 – Spk Out- GND/ Black PIN 9 – Spk Out ( L) / Grey PI...
Este manual também é adequado para os modelos :Monitores - 856 (151.47 kb)