Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company. • Use the appropriate power plug which complies with your local power standard. • To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100-240V AC. • If you encounter technical problems with the monitor, contact a qualified service technician or your retailer. Monitor introduction Front view 1. SPLENDID™* / Auto-adjust** / Exit MENU button 2. Volume hotkey/Decrease button (for models with speakers) 3. MENU/Enter/Selection button 4. Brightness hotkey/Increase button 5 . Power button 1. SPLENDID™* / Auto-adjust** / Exit MENU button 2. Contrast hotkey/Decrease button (for models without speakers) 3. MENU/Enter/Selection button 4. Brightness hotkey/Increase button 5 . Power button * Hotkey for 5 video preset mode selection. ** Adjusts the image automatically by pressing the button for 2–3 seconds. Rear view Stereo speakers (for some models) Connecting the cables Connect the cables as shown: 1. Power cord 2. Audio-in cable (for models with speakers) 3. 4. DVI signal cable (for some models) VGA signal • To connect the power cord: connect one end of the power cord securely to the monitor’s AC input port, and the other end to a power outlet. • To connect the VGA/DVI cable: a. Plug the VGA/DVI connector to the LCD monitor’s VGA/DVI port. b. Connect the other end of the VGA/ DVI cable to your computer’s VGA/ DVI port. c. Tighten the two screws to secure the VGA/DVI connector. • To connect the audio cable (For those models with speakers): connect one end of the audio cable to the monitor’s Audio-in port, and the other end to the computer's audio-out port. When both the VGA and the DVI cables are connected, you can choose either VGA mode or DVI mode from the Input Select item of the OSD functions (for some models). Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED lights amber and there is no screen image • Check if the monitor and the computer are in the ON mode. • Make sure the signal cable is properly connected the monitor and the computer. • Inspect the signal cable and make sure none of the pins are bent. • Connect the computer with another available monitor to check if the computer is properly working. Screen image is too light or dark • Adjust the Contrast and Brightness settings via OSD. Screen image is not centered or sized properly • Press the button for 2–3 seconds to automatically adjust the image (VGA input only). • Adjust the H-Position or V-Position settings via OSD (VGA input only). Screen image bounces or a wave pattern is present in the image • Make sure the signal cable is properly connected to the monitor and the computer. • Move away electrical devices that may cause electrical interference. Screen image has color defects (white does not look white) • Inspect the signal cable and make sure that none of the pins are bent. • Perform All Reset via OSD. • Adjust the R/G/B color settings or select the Color Temperature via OSD. Screen image is blurry or fuzzy • Press the button for 2–3 seconds to automatically adjust the image (VGA input only). • Adjust the Phase and Clock settings via OSD (VGA input only). No sound or sound is low (for models with speakers) • Ensure that the audio cable is properly connected to the monitor and the computer • Adjust the volume settings of both your monitor and computer. • Ensure that the computer sound card driver is properly installed and activated. Supported operating modes * Modes not listed in the table may not be supported. For optimal resolution, we recommend that you choose a mode listed in the table above. Francais 6 Guide de demarrage rapide Moniteur LCD Series VH196 Guide de demarrage rapide Francais 7 Guide de demarrage rapide Informations sur la securite • Avant de configurer le moniteur, assurez-vous d’avoir lu toute la documentation incluse dans le paquet. • Pour eviter les risques d’incendie et de choc electrique, n’exposez pas le moniteur a la pluie ou a l’humidite. • Le moniteur ne doit etre utilise qu’avec le type de source d’alimentation indique sur l’etiquette a l’arriere. Si vous n’etes pas sur du type d’alimentation electrique dont vous disposez, contactez votre revendeur ou votre fournisseur en electricite local. • Utilisez la prise d’alimentation compatible avec les standards electriques de votre region. • Pour assurer un fonctionnement correct, n’utilisez le moniteur qu’avec des ordinateurs certifies UL, et fonctionnant entre 110-240V. • Si vous rencontrez un probleme technique avec votre moniteur, contactez un technicien qualifie ou votre revendeur. Introduction au moniteur Vue avant 1....
Este manual também é adequado para os modelos :Monitores - VH198 (6.91 mb)