Assessments - 4, GPA: 4.5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
The Manual Lamp Control automatically turns off if you adjust using the Auto Lamp Control. 3) Manual Lamp Control -Allows you to adjust the backlight of the selected display regardless of the time. The Auto Lamp Control automatically turns off if you adjust using the Manual Lamp Control. The Maintenance Control feature is available only for the displays whose power status is ON. The Input source of MagicNet works only on MagicNet model. The Input source of TV works only on TV model. Maintenance Scroll 1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen. 1) Safety Screen -Eliminates the afterimages that can result when the selected display stays in Pause mode for an extended period of time. You can set the repeat cycle timer by selecting the "Interval" by hour and "Second" by second. It can be set to Scroll, Pixel, Bar and Eraser by Screen Type. The Input source of MagicNet works only on MagicNet model. The Input source of TV works only on TV model. Setting Second, you can set to 1, 2, 3, 4, 5 for Scroll Type and to 10, 20, 30, 40, 50 for Pixel, Bar, and Eraser Type. The Maintenance Control feature is available only for the displays whose power status is ON. Maintenance Video Wall 1. Click on the "Maintenance" icon in the Main Icon column to display the Maintenance screen. 1) Video Wall -A Video Wall is a set of video screens that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall (Screen divider) -The screen can be divided into. You can select a number of screens with a different layout when dividing. • Select a mode from Screen divider. • Select a display from Display Selection. • The place will be set up by pressing a number in the selected mode. • The MDC program supplied by Samsung supports up to 5x5 LCD Displayes. 3) On / Off -Turns on/off the Video Wall function of the selected display. 4) Format -The format can be selected to see a divided screen. • Full • Natural You may not operate this function in MagicNet. The Input source of TV works only on TV model. The Maintenance Control function is available only for the displays where the power status is ON. Troubleshooting 1. The display you wish to control does not appear on the Power Control Info Grid -Check the connection of RS232C. (Check if it is properly connected to the Com1 port) -Check the displays to see if any of the other displays connected have the same ID. If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict. -Check if the Display Set ID is a number between 0 and 25. (Adjust using the Display menu) Note : A Display Set ID must be a value between 0 and 25 . 2. The display you wish to control does not appear on the other Control Info Grids -Check to see if the display power is ON. (You can check this in Power Control Info Grid) -Check if you can change the input source of the display. 3. The dialogue box appears repeatedly. -Check to see if the display you wish to control is selected. 4. Both On Timer and Off Timer have been set but different time is showing. -Apply current time to synchronize the display clocks. 5. The remote may not function properly when you turn off the remote Function, disconnect the RS-232C cable, or exit the program in an Irregular manner. Rerun the program and turn the remote function again to Restore normal functions.
Monitores - 400DX (4.13 mb)