Assessments - 3, GPA: 4.7
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Connecting displays with a duplicate ID can cause the displays not to be shown due to data collision. 3. Check that the display ID is within the range of 0 and 99. (Change the ID using the Display menu.) |^7| For a display that supports the ID in a range of 0 to 99, the ID should be set between 0 and 99. The display you want to control does not appear on the other Control Info Grids. Check that the display is powered on. (See the power status in the system information chart.) Ensure you select the input source the display is connected to. The following message appears repeatedly. Check that the display you want to control is selected. Displays power on or off at different time from one another even though On Time or Off Time is set. Adjust the time on the PC to synchronize the time between the connected displays. The remote control does not work. The remote control may not work if the RS-232C cable is removed or the program is closed abnormally while the Remote Control function is Disable. To resolve this, run the program again and set Remote Control to Enable. This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displayed. 3 When two displays are selected (e.g. in sequence of ID 1 andID 3): The settings for ID 1 are displayed before the settings for ID 3. 4 When the All+Select checkbox is checked and all displays are selected: The default settings are displayed. Adjusting the LCD Display Input Available Modes • □ PC / DVI / DisplayPort • Eav • E Component • HDMI • E MagicInfo • D TV C' I Note • A TV tuner box (sold separately) must be connected to use the TV. (US Only) • MagicInfo can only be enabled when a network box is connected. Source List E i Use to select PC, HDMI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. Component 5. HDMI1 - This is deactivated when a TV tuner box is installed 6. HDMI2 - This is deactivated when a network box is installed. 7. DisplayPort 8. MagicInfo - Activated when a network box is connected. 9. TV - Activated when a TV tuner box is connected. © Note The RGB/COMPONENT IN port is compatible with RGB (PC) and Component signals. Adjusting the LCD Display However, the picture may display abnormally if the connected external input signal is different from the selected video signal. PIP E 13 IS Note The PIP function is not available when Video Wall is On. When external AV devices such as VCRs or DVDs are connected to the LCD Display , PIP allows you to watch video from those devices in a small window super-imposed on the PC Video signal. (Off/On) © Note • PIP turns off when the LCD Display is switched to an external source. * If you select i, ■■], K in Size, Position and Transparency will not be activated. PIP PIP -1 £ Source Size ■ Position l~3 □ m\ UK Transparency Turns the PIP Screen Off/On. • Off • On Source pip £ s Source Size Position Transparency AV_ HDM] 1 Display Port £ IK c" I Note • PIP is disabled if the primary screen does not receive a signal. • A TV tuner box (sold separately) must be connected to use the TV. (US Only) Selects the input source for the PIP. • PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort • DVI : PC • AV:PC Adjusting the LCD Display • HDMI : PC • DisplayPort : PC Size Changes the Size of the PIP window. IS Note
Monitores - 400DX-3 (5.7 mb)