If more than one displays have the same ID, those displays are not properly detected by the program due to data conflict. -Check if the Display Set ID is a number between 0 and 25. (Adjust using the Display menu) Note : A Display Set ID must be a value between 0 and 25 . 2. The display you wish to control does not appear on the other Control Info Grids -Check to see if the display power is ON. (You can check this in Power Control Info Grid) -Check if you can change the input source of the display. 3. The dialogue box appears repeatedly. -Check to see if the display you wish to control is selected. 4. Both On Timer and Off Timer have been set but different time is showing. -Apply current time to synchronize the display clocks. 5. The remote may not function properly when you turn off the remote Function, disconnect the RS-232C cable, or exit the program in an Irregular manner. Rerun the program and turn the remote function again to Restore normal functions. This program may malfunction due to problems in communication circuits or interference from electronic appliances nearby. Settings Value Display In Multiple Display Mode When there are more than one displays connected, the settings values are displayed as follows. 1. No selection: Displays the Factory Default Value. 2. Selected one display: Fetches and displays the settings value for the selected display. 3. Selected one display (ID1) and add another display (ID3): The program, which was displaying the settings value of ID 1, fetches and displays the value of ID3. 4. Selected all sets using Select All: Returns to the Factory Default Value. Adjusting the PDP Display Input Available Modes • PC / DVI / BNC • AV • HDMI • Component Source List MENU > ENTER > [Input] > ENTER > [Source List] > , > ENTER Use to select PC, DVI or other external input sources connected to the PDP Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. HDMI 5. Component 6. BNC Note • The direct button on the remote control is the 'SOURCE' button. Edit Name MENU > ENTER > [Input] > > ENTER > [Edit Name] > , > ENTER Adjusting the PDP Display Name the input device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / PC Note • When connecting a PC to the HDMI or DVI terminal, set Edit Name to PC. • In other cases, set Edit Name to AV. • However, since 640x480, 720P (1280x720), and 1080p (1920x1080) are common signals for AV and PC, make sure to set the Edit Name in accordance with the input signal. • The Picture menu changes depending on the input signal and Edit Name. Picture [PC / DVI/ BNC] Available Modes • PC / DVI / BNC • AV • Component MagicBright MENU > > ENTER > [Picture] > ENTER > [MagicBright] > , > ENTER MagicBright is a new feature providing the optimum viewing environment depending on the contents of the image you are watching. Currently four different modes are available: Entertain, Internet, Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of the four settings by simply pressing the MagicBright control button. 1. Entertain High brightness Adjusting the PDP Display For watching motion pictures such as a DVD or VCR. 2. Internet Medium brightness For working with a mixture of images such as texts and graphics. 3. Text Normal brightness For documents or works involving heavy text. 4. Custom Although the values are carefully chosen by our engineers, the pre-configured values may not be comfortable to your eyes depending on your taste. If this is the case, adjust the brightness and contrast by using the OSD menu. Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. MENU > > ENTER > [Picture] > > ENTER > [Custom] Note By adjusting the picture using the Custom function, MagicBright will change to Custom mode. Contrast MENU > > ENTER > [Picture] > > ENTER > [Custom] > ENTER> [Contrast] > , > ENTER Adjusts the Contrast. Brightness MENU > > ENTER > [Picture] > > ENTER > [Custom] > > ENTER> [Brightness] >, > ENTER Adjusts the Brightness. Sharpness MENU > > ENTER > [Picture] > > ENTER > [Custom] > > > ENTER > [Sharpness] >, > ENTER Adjusts the Sharpness. Adjusting the PDP Display Color Tone MENU > > ENTER > [Picture] > > >ENTER > [Color Tone] > , > ENTER The color tones can be changed. 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note If you set the Color Tone to Cool, Normal, Warm, or Custom, the Color Temp function is disabled. If you set the Color Tone to Off, the Color Control function is disabled Color Control Adjusts individual Red, Green, Blue color balance. MENU > > ENTER > [Picture] > > >> ENTER > [Color Control] Note If you adjust the picture by using the Color Control function, Color Tone will turn to the Custom mode. Red MENU > > ENTER > [Picture] > > >> ENTER > [Color Control] > ENTER > [Red] > , > ENTER Green MENU ...
)
