Assessments - 1, GPA: 5
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Video signal H/V Separate, TTL, P. or N. H/V Composite, TTL, P. or N. Sync-on-green 0.3 Vp-p, N. 0.7 Vp-p @ 75 ohm Video Color system Video format PAL/NTSC/SECAM CVBS,S-VHS Power Supply Input Output AC 100-240 Vrms (50 ~ 60Hz) DC 12V/3A AC 100-240 Vrms (50 ~ 60Hz) DC 12V/4.5A * Referring to Preset timing modes, page 26. English 23 Appendix Table 5. Technical and environmental specifications 150MB 170MB Power Consumption Maximum Power Saving 33 W < 3 W 52 W < 3 W Dimensions/ Unit (WxHxD) : Weight Monitor body 15.0 x 15.0 x 2.2 inch / 9.7 lbs 17.6 x 17.2 x 2.48 inch / 14.3 lbs (382 x 380 x 57 mm / 4.4 kg ) (448 x 438 x 63 mm / 6.5 kg) With stand 15.0 x 15.0 x 6.0 inch / 9.7 lbs 17.6 x 17.2 x 8.15 inch / 14.3 lbs (382 x 380 x 153 mm / 4.4 kg) (448 x 438 x 207 mm / 6.5 kg) When folded 15.0 x 17.7 x 2.4 inch / 9.7 lbs 17.6 x 20.5 x 2.75 inch / 14.3 lbs (382 x 450 x 61 mm / 4.4 kg) (448 x 522 x 70 mm / 6.5 kg) Carton 19.1 x 20.5 x 8.0 inch / 15.4 lbs 22.5 x 24.8 x 7.95 inch / 20.9 lbs (486 x 522 x 203 mm / 7.0 kg) (572 x 632 x 202 mm / 9.5 kg) Environmental Considerations Operating Temperature 50 °F to 104 °F (10 °C to 40 °C) Operating Humidity 10% to 80% Storage Temperature 13 °F to 113 °F (-25 °C to 45 °C) Storage Humidity 5% to 95% Audio Audio Input 1 RCA Jack Red(R) White(L), 0.5Vrms (-9dB) Characteristics Audio Input 2 3.5o Stereo Jack, 0.5Vrms (-9dB) Line-out 3.5o Stereo Jack, 0.7Vrms (-7dB) (Audio out) Headphone out Max. 10mW Output (3.5o Stereo Jack 32W) Frequency RF: 80Hz - 15kHz (at- 3dB) Response A/V: 80Hz - 20kHz (at - 3dB) English 24 Appendix Pin Assignments Table 6. 15 pin D-sub connector Pin Separate H/V Composite H/V Sync-on-green 1 Red Red Red 2 Green Green Green + H/V Sync 3 Blue Blue Blue 4 GND GND GND 5 GND (DDC Return) GND (DDC Return) GND (DDC Return) 6 GND-Red GND-Red GND-Red 7 GND-Green GND-Green GND-Green 8 GND-Blue GND-Blue GND-Blue 9 No Connection No Connection Not used 10 GND-Sync/Self Test GND-Sync/Self Test GND-Sync/Self Test 11 GND GND GND 12 DDC _SDA DDC _SDA DDC _SDA 13 H_Sync H/V Sync Not used 14 V_ Sync Not used Not used 15 DDC _SCL DDC _SCL DDC _SCL English 25 Appendix Display Modes If the signal from the system equals to the standard signal mode, the screen is adjusted automatically. If the signal from the system doesn't equal to the standard signal mode, adjust the mode with referring to the Videocard user guide because the screen might not display or only the power LED might be on. For the display modes listed below, the screen image has been optimized during manufacture. Table 7. Preset timing modes Mode Resolution Horizontal Frequency (kHz) Vertical Frequency (Hz) Pixel Clock Frequency (MHz) Sync Polarity (H/V) VGA 720 x 400 31.469 70.087 28.322 –/+ 640 x 480 31.469 59.940 25.175 –/– 640 x 480 37.500 75.000 31.500 –/– 640 x 480 43.269 85.008 36.000 –/– SVGA 800 x 600 46.875 75.000 49.500 +/+ 800 x 600 53.674 85.061 56.250 +/+ XGA 1024 x 768 48.363 60.004 65.000 –/– 1024 x 768 60.023 75.029 78.750 +/+ 1024 x 768 68.677 84.997 94.500 +/+ SXGA (170MB only) 1280 x 1024 63.981 60.020 108.000 +,–/+,– 1280 x 1024 79.976 75.025 135.000 +/+ English 26 English 27 Appendix Installing VESA compliant mounting devices Refer to page 29 to fold the base Align the mounting interface pad with the holes in the rear cover mounting pad and secure it with the four screws that came with the arm-type base, wall mount hanger or other bases. Wall Mount Instructions The following instructions apply to a hollow sheet-rock wall only Tools/Hardware needed - Philips screwdriver, four toggle bolts, 5/8in dia. Drill bit and drill. Contact Ergotron at (800) 888-8458 to purchase the triple pivot direct mount adapter and wall mount bracket kit. • 150MB (15") : No. 47 - 007 - 099 (Pivot direct mount adapter) No. 97 - 101 - 003 (Wall mount bracket kit) • 170MB (17") : No. 47 - 007 - 099 - 02 (Pivot direct mount adapter) No. 97 - 101 - 003 - 00 (Wall mount bracket kit) Align the wall mount bracket on the wall at the desired height, making sure that the bracket will be mounted between the wall studs. Mark the four corner openings and drill four 5/8-dia. holes. Assemble the wall mount kit according to the instructions provided with it. Securely attach Ergotron’s flat panel, triple pivot direct mount adapter to the back of the monitor using the four 4mm, .7 pitch x 10mm screws provided with the arm. Secure the assembly to the wall using four 3/16 by 3-inch long toggle bolts. Mounting Rear cover mounting pad Appendix Retractable Stand 15 NOTE: *Please pull the rear retractable part of the stand when you tilt the monitor to the backward direction to give more stability. The maximum tilt angle is 15 degree to the backward direction. Please do not tilt the monitor other than specified range.Excessive force to tilt the monitor other than specified range may give permanent damage to the mechanical part of the stand. Maintenance of Your LCD monitor WARNING: To avoid risk of electric shock, do not disassemble the monitor ...
Este manual também é adequado para os modelos :Monitores - 150MB (1.85 mb)
Monitores - 170MB (1.85 mb)