Assessments - 4, GPA: 3.8
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Do not put any heavy objects on the product. • This may result in personal injury and/or damage to the product. o Good Postures When Using the Monitor v: When using the product, use it in the correct position. • Keep your back straight while looking at the product. • The distance between your eyes and the screen should be between 45 to 50 cm. Look at the screen from a slightly higher location than the height of the screen. • When using the product, use it in the correct position. • Adjust the angle so that light is not reflected on the screen. • Place your arms perpendicular to your sides and allow your arms to be level with the back of the hand. • Keep your elbow at 90 degrees. • Keep your knees at greater than 90 degrees, and keep your heels firmly on the floor. Keep your arms lower than your heart. Unpacking i Front i Rear Please make sure the following items are included with your monitor. If any items are missing, contact your dealer. Contact a local dealer to buy optional items. Unpacking ^ Without stand Monitor Monitor & Simple Stand Bottom Manual ft Quick Setup Guide Warranty Card/ Registration Card (Not available in all User's Guide, Monitor Driver locations) Front 0 MENU button PI Customized Key [ra] £» Brightness button P] (D Adjust buttons [TV, J Enter button [(a] 0; AUTO button ^ Power button [:':]/ Power indicator Opens the OSD menu. Also use to exit the OSD menu or return to the previous menu. You can customize key assignment for the Custom button according to your preferences. You can configure the customized key for a required _ _function via Setup > Customized Key. When OSD is not on the screen, push the button to adjust brightness. Adjust items in the menu. Activates a highlighted menu item. Use this button for auto adjustment. Use this button for turning the monitor on and off./ This light glows blue during normal operation, and blinks blue once as the monitor saves your adjustments. See PowerSaver described in the manual for further information regarding power saving functions. For energy conservation, turn your monitor OFF when it is not needed, or when leaving it unattended for long periods. o Rear Simple stand (The configuration at the back of the monitor may vary from product to product.) Connect the power cord for your monitor to the power port on the back of the monitor. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. The Kensington lock is a device used to physically fix the system when using it in a public place. (The locking device has to be purchased separately. ) For using a locking device, contact where you purchase it. See Connecting the Monitor for further information regarding cable connections. Q: POWER port Q} RGB IN port o Kensington Lock Unpacking i Front i Rear Л MAIN Connecting the Monitor Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby outlet. Use appropriate connection for your computer. I Using the D-sub (Analog) connector on the video card. Connect the signal cable to the 15-pin, D-sub port on the back of your monitor. [ RGB IN ] Connected to a Macintosh. Connect the monitor to the Macintosh computer using the D-sub connection cable. If the monitor and the computer are connected, you can turn them on and use them. Connecting the Monitcx i (Jsira the Stand i Installing the Monitor Driver i Installing the Monitor Driver (Automatic) (Manual) Using the Stand Monitor Assembly Monitor and Bottom ~> Attaching a Base This monitor accepts a 75.0 mm x 75.0 mm VESA-compliant mounting interface pad. Simple stand Monitor Mounting interface pad (Sold separately) 1. 2. 3. 4. Turn off your monitor and unplug its power cord. Lay the LCD monitor face-down on a flat surface with a cushion beneath it to protect the screen. Remove four screws and then remove the stand from the LCD monitor. Align the mounting interface pad with the holes in the rear cover mounting Pad and secure it with four screws that came with the arm-type base, wall mount hanger or other base. A A Do not use screws longer than the standard dimension, as they may damage the inside of the Monitor. For wall mounts that do not comply with VESA standard screw specifications, the length of the screws may differ depending on their specifications. Do not use screws that do not comply with the VESA standard screw specifications. Do not fasten the screws too tightly, as this may damage the product or cause the product to fall, leading to personal injury. Samsung is not liable for these kinds of accidents. Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions. To mount the monitor on a wall, you should purchase the wall mounting kit that allows you to mount the monitor at least 10cm away from ...
Este manual também é adequado para os modelos :Monitores - 2023NW (4.26 mb)
Monitores - 923NW (4.26 mb)