Assessments - 2, GPA: 5
(
)
)
|
Fotos e especificações Samsung 720N |
por este dispositivo também tem outras instruções :
Facilidade de uso
MENU > ^ , Ў > > ^ , Ў > > ^ , Ў > MENU V-Position Changes the vertical position of the monitor's entire display. MENU > ^ , Ў > > ^ , Ў > > ^ , Ў > MENU OSD Menu Description Play/Stop Language Change the language used in the menu. You can choose one of the seven languages. Note:The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. MENU > ^ , Ў > > > ^ , Ў > MENU H-Position You can change the horizontal position where the OSD menu appears on your monitor. MENU > ^ , Ў > > ^ , Ў > > ^ , Ў > MENU V-Position You can change the vertical position where the OSD menu appears on your monitor. MENU > ^ , Ў > > ^ , Ў > > ^ , Ў > MENU Transparency Change the transparency of the background of the OSD. MENU > ^ , Ў > > ^ , Ў > > ^ , Ў > MENU Display Time The menu will be automatically turn off if no adjustments are made for a certain time period. You can set the amount of time the menu will wait before it is turned off. MENU > ^ , Ў > > ^ , Ў > > ^ , Ў > MENU Setup Menu Description Play/Stop Image Reset Image parameters are replaced with the factory default values. MENU > ^ , Ў > > > ^ , Ў > MENU Color Reset Color parameters are replaced with the factory default values. MENU > ^ , Ў > > ^ , Ў > > ^ , Ў > MENU Information Menu Description Information Shows a video source, display mode on the OSD screen. MENU >^ , Ў Menu Description Information Shows a video source, display mode on the OSD screen. MENU >^ , Ў Check List Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the Information section or contact your dealer. Symptom No images on the screen. I cannot turn on the monitor. Check List Is the power cord connected properly? Can you see "Check Signal Cable" on the screen? If the power is on, reboot the computer to see the initial screen (the login screen), which can be seen. Can you see "Not Optimum Mode","Recommanded Mode 1280 x 1024 60 Hz" on the screen? Solutions Check the power cord connection and supply. Check the signal cable connection. If the initial screen (the login screen) appears, boot the computer in the applicable mode (the safe mode for Windows ME/XP/2000) and then change the frequency of the video card. (Refer to the Preset Timing Modes) Note: If the initial screen (the login screen) does not appear, contact the Service Center or your dealer. You can see this message when the signal from the video card exceeds the maximum resolution and frequency that the monitor can handle properly. Adjust the maximum resolution and frequency that the monitor can handle properly. If the display exceeds SXGA or 75 Hz, a "Not Optimum Mode","Recommanded Mode 1280 x 1024 60 Hz" message is displayed. If the display exceeds 85Hz, the display will work properly but the "Not Optimum Mode","Recommanded Mode 1280 x 1024 60 Hz" message appears for one minute and then disappears. The screen can be unbalanced due to the cycle of the video card signals. Readjust position by referring to the OSD. The screen shows strange colors or just black and white. The screen suddenly has become unbalanced. The screen is out of focus or OSD cannot be adjusted. LED is blinking but no images on the screen. There are only 16 colors shown on the screen. The screen colors have changed after changing the video card. There is a message that reads "Unrecognized monitor, Plug & Play (VESA DDC) monitor found". There is no image on the screen. Is the power indicator on the monitor blinking at 1 second intervals? Is the screen displaying only one color as if looking at the screen through a cellophane paper? Have the screen colors become strange after running a program or due to a crash between applications? Has the video card been set properly? Have you changed the video card or the driver? Have you adjusted the resolution or frequency to the monitor? Have you adjusted the resolution or frequency on the monitor? Is the frequency properly adjusted when checking the Display Timing on the menu? Have the Windows colors been set properly? Has the video card been set properly? Have you installed the monitor driver? See the video card manual to see if the Plug & Play (VESA DDC) function can be supported. Please change to the recommended mode during this one-minute period. (The message is displayed again if the system is rebooted.) The monitor is in PowerSaver mode. press any key on the keyboard to activate the monitor and restore the image on the screen. Check the signal cable connection. Make sure the video card is fully inserted in it's slot. Reboot the computer. Set the video card by referring to the video card manual. Adjust screen image position and size using the OSD. Adjust the resolution and frequency at the video card. (Refer to the Preset Timing Modes). Adjust the resolution and frequency of the video card. (Refer to the Preset Timing Modes). Adjust the frequency properly by ...