Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
If using a screen saver, set it to the active screen mode. Image Retention Free Do not use a damaged or loose plug. • This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the plug with wet hands. • This may cause an electric shock or fire. Use only a properly grounded plug and receptacle. • An improper ground may cause electric shock or equipment damage. Insert the power plug firmly so that it does not come loose. • A bad connection may cause fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage. • This may cause an electric shock or fire. Do not connect too many extension cords or plugs to an outlet. • This may cause fire. Installation Be sure to contact an authorized service center, when installing your monitor in a location with the heavy dust, high or low temperatures, high humidity, chemical substance and where it operates for 24 hours such as the airport, the train station or etc. Failure to do so may cause a serious damage to your monitor. Put your monitor in a location with low humidity and a minimum of dust. • Failure to do so may cause an electric shock or fire inside the monitor. Do not drop the monitor when moving it. • This may cause damage to the product or human body. Install the monitor base in a showcase or shelf so that the end of the base does not project beyond the showcase or shelf. • Dropping the product may cause damage to the product or personal injury. Do not place the product on an unstable or small surface area. • Place the product on an even, stable surface, as the product may fall and cause harm to someone walking by, specifically children. Do not place the product on the floor. • Someone, specifically children could trip over it. Keep any flammable objects such as candles, insecticides or cigarettes awayfrom the product. • Otherwise, this may cause a fire. Keep any heating devices away from the power cable. • A melted coating may lead to electric shock or fire. Do not install the product in places with poor ventilation, for instance, a bookshelf, closet, etc. • Any increase in internal temperature may cause fire. Set down the monitor carefully. • The monitor could be damaged or broken. Do not place the monitor face down. • The TFT-LCD surface may be damaged. Installing a wall bracket must be done by a qualified professional. • Installation by unqualified personnel may result in injury. • Always use the mounting device specified in the owner's manual. When installing the product, make sure to keep it away from the wall (more than 10cm/4inch ) for ventilation purposes. • Poor ventilation may cause an increase in the internal temperature of the product, resulting in a shortened component life and degraded performance. Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent directly on the monitor. • This may cause damage, electric shock or fire. Use the recommended detergent with a smooth cloth. If the connector between the plug and the pin is dusty or dirty, clean it properly with a dry cloth. • A dirty connector may cause an electric shock or fire. Make sure to unplug the power cord before cleaning the product. • Otherwise, this may cause electric shock or fire. Unplug the power cord from the power outlet and wipe the product using a soft, dry cloth. • Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. Contact the Service Center or Customer Center for interior cleaning once a year. • Keep the product's interior clean. Dust which has accumulated in the interior over an extended period of time may cause malfunction or fire. • The quantity of an anion may be decreased. Other Do not try to remove the anion cap without referring to qualified service personnel. Do not put a pin or wire inside of the anion cap. • This may cause static electricity. • When separating the monitor, turn off the power and then contact the Service Center. Do not remove cover (or back). • This may cause an electric shock or fire. • Refer servicing to qualified service personnel. If your monitor does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and contact an authorized dealer or service. • This may cause an electric shock or fire. Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehicle. • This may cause malfunction, an electric shock or fire. • Especially avoid operating the monitor near water or outdoors where it could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, turn the monitor off and unplug the power cord. Then contact the Service Center . • The monitor may malfunction, causing an electric shock or fire. Disconnect the plug from the outlet during storms or lightening or if it is not used for a long period...