Assessments - 1, GPA: 3
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Look down at the screen and face the screen forwards. • Maintain the correct posture when using this product. • Adjust the angle of the product so that light is not reflected onto the screen. • Keep your elbow at a right angle and keep your arm level with the back of your hand. • Keep your elbow at a right angle. • Place your heels flat on the ground while keeping your knees at an angle of 90 degrees or higher and maintain the position of your arm so that your arm is below your heart. Major Safety Precautions 1-3 2 Installing the Product 2-1 Package Contents ^j| • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the Product at a later stage. Type 1 Monitor & HAS stand Contents & 4/ & ¡00 Installation Manual Product Warranty (Not available in all locations) User Manual D-Sub Cable Power Cord Stand OPTIONAL PARTS HDMI Cable DVI Cable Cleaning Cloth Stereo Cable The cleaning cloth is supplied with black high-glossy models only. Installing the Product 2-1 Type 2 Monitor & Simple stand MagicRotation program can not be provided as Simple Stand does not support Pivot function. Contents ^7 ¿7 & Installation Manual Product Warranty (Not available in all locations) User Manual D-Sub Cable • \ Power Cord Stand Stand Connector OPTIONAL PARTS HDMI Cable DVI Cable Cleaning Cloth Stereo Cable The cleaning cloth is supplied with black high-glossy models only. Installing the Product 2-1 2-2 Installing the Stand p Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards. HAS stand Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Do not remove the stopper pin before installing the base. Hold the main body of the product with your hand as shown by the figure. Insert the stand base into the stand connection part in the direction shown in the figure. & Turn the connecting screw at the bottom of the stand fully so that it is completely fixed. Ft Installing the Product 2-2 After the installation of the base, stand the monitor up as shown in the figure. Now you can remove the stopper pin to adjust the stand. - Caution Avoid lifting the product holding only the stand. Disassembly is in the reverse order of the assembly. When pivot the monitor from horizontal to vertical,tilt the monitor backward to maxium first. o . Stand Stopper Installing the Product 2-2 Simple stand Insert the Stand Connector into the Stand in the direction shown by the figure. Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Installing the Product 2-2 Hold the main body of the product with your hand as shown by the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure. Installing the Product 2-2 2-3 Installing the Stand for the Wall Mount This product provides a stand mount of 75 mm x 75 mm(3.0 x 3.0 inches) that complies with the VESA specifications. Simple stand Stand Mount Stand (Optional) 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards. 3. Separate the stand. 4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw. IQ • If you use a screw that is longer than the standard specifications, the inside of the product may be damaged. • For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications. • Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using excessive force. • This may result in damage to the product or injury due to the product falling. • The company shall not be held liable for any damage or injury. • The company shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the specified specifications or due to an installation not performed by an authorized installation Installing the Product 2-3 engineer. • When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from the wall. • The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified specifications. • Use the wall m...
Este manual também é adequado para os modelos :Monitores - B1740R (2.01 mb)
Monitores - B1940M (2.01 mb)
Monitores - B1940MR (2.01 mb)
Monitores - B1940R (2.01 mb)