Assessments - 2, GPA: 4 ( )

Fabricante : Samsung Arquivo Tamanho: 1.78 mb Arquivo Nome : Língua de Ensino:

por este dispositivo também tem outras instruções :

Monitores - BX1940 (2.2 mb)

Monitores - BX1940 (2.41 mb)

Monitores - BX1940 (2.22 mb)

Now you can remove the stopper pin to adjust the stand. - Caution Avoid lifting the product holding only the stand. Disassembly is in the reverse order of the assembly. When pivot the monitor from horizontal to vertical,tilt the monitor backward to maxium first. o . Stand Stopper Installing the Product 2-2 Simple stand Insert the Stand Connector into the Stand in the direction shown by the figure. Check if the Stand Connector is firmly connected. Turn the connecting screw at the bottom of the stand fully so that it is completely fixed. Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Installing the Product 2-2 Hold the main body of the product with your hand as shown by the figure. Push the assembled stand into the main body in the direction of the arrow as shown in the figure. Installing the Product 2-2 2-3 Installing the Stand for the Wall Mount This product provides a stand mount of 75 mm x 75 mm(3.0 x 3.0 inches) that complies with the VESA specifications. Simple stand Stand Mount Stand (Optional) 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards. 3. Separate the stand. 4. Align the groove of the part of the product that is to be connected to the stand with the groove in the stand (desk-top stand, wall mount stand or another stand) and firmly fix the stand by fastening the screw. IQ • If you use a screw that is longer than the standard specifications, the inside of the product may be damaged. • For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications. • Do not use screws that are incompatible with the standard VESA specifications and do not assemble them using excessive force. • This may result in damage to the product or injury due to the product falling. • The company shall not be held liable for any damage or injury. • The company shall not be held liable for any damage to the product or injury caused by using a stand that is not compatible with the specified specifications or due to an installation not performed by an authorized installation Installing the Product 2-3 engineer. • When installing the product using a wall mount, purchase a wall mount that provides at least 10 cm of space from the wall. • The company shall not be held liable for any problems caused by using a stand that is not compatible with the specified specifications. • Use the wall mount according to the international specifications. Installing the Product 2-3 2-4 Connecting with a PC |^j The connecting part may differ depending on the product model. 1. Connect the product to a PC depending on the video output supported by the PC. • When the graphics card provides D-Sub () output • Connect the [RGB IN] port of the product to the [D-Sub] port of the PC with the D-Sub cable. • When the graphics card provides DVI() output • Connect the [DVI IN] port of the product to the [DVI] port of the PC with the DVI cable. 2. Connect one end of the power cord to the [POWER] port of the product and connect the other end of the power cord to the 220V or 110V wall outlet. (The input voltage is switched automatically.) ^j| When the product is connected to a PC, you can turn the product on and use it. When both the DVI () and D-Sub () cables are connected, you can select the input signal by pressing the[ ©(SOURCE ]button. POWER ON [ | ] / OFF Switches the Power On/Off. Some of the models with HAS stand for special region have this button.And some of the models with speaker have this button. 3. Connect the [AUDIO IN] port on the rear side of the monitor to the sound card of the PC. Applicable to the models that have speakers only. Installing the Product 2-4 2-5 Connecting an HDMI cable 1. Connect the HDMI output port of your digital output device to the [HDMI IN] port of the product using the HDMI cable. Installing the Product 2-5 2-6 Kensington Lock Kensington Lock A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. Since the shape and usage of the locking device may differ depending on the model and the manufacturer, for more information, refer to the User Manual supplied with the locking device. You have to purchase an additional locking device. The location of the Kensington Lock may be different depending on its model. Locking the product 1. Insert the locking part of the locking device into the hole of the Kensington lock of the product(Q) and turn it in the locking direction(©). 2. Connect the Kensington lock cable. 3. Tie the Kensington...

Baixe o seu

Para fazer o download, introduza 2 dígitos :