Assessments - 3, GPA: 4
(
)
)
|
Fotos e especificações Samsung C27A750X |
por este dispositivo também tem outras instruções :
Facilidade de uso
Be sure to perform this process before configuring the IP. 4 Configure the static IP. Assign the static IP that is allotted to the HUB Monitor’s network device. Go to Control Panel Network and Internet Network and Sharing Center Change adapter settings. Next, right-click on the HUB Monitor’s network device (marked “LAN9512/ .... .... .... .... .... .... .... .... 3 9 2 Using "HUB Monitor" 2 Using "HUB Monitor" LAN9514 USB 2.0 to Ethernet 10/100 Adapter #7”), select Properties Internet Protocol Version 4 (TCP/IPv4) Properties, and configure the static IP and DNS settings. 5 After configuring the IP, click OK. The following message will appear. A static IP must be allotted to only one network device. The following message will appear if the same static IP is allotted to the network devices of both the notebook PC and HUB Monitor. (Ensure the network device that is not in use is set to Do not use.) Select No in the message window. To use the notebook PC’s LAN network, set the HUB Monitor’s network to Do not use and the notebook PC’s network device to Use. Next, configure the IP settings. 6 Click Close. .... .... 2 Using "HUB Monitor" 2.6 Notice before your use of Wireless USB or USB Mode 1 Most of the games require high resolution and fast response time. When you play a game, we recommend to use Analog or HDMI Mode rather than Wireless USB or USB Mode. Also, for playing Game and Movie clips on Windows XP or VISTA is not supported. 2 When Wireless USB/USB Mode is used for first time or PC power saving mode is disconnected, it may take some time to acknowledge for Wireless USB/USB Mode. 3 Either it is Wireless USB or USB Mode(USB2.0 supported by PC), we recommend to connect to USB2.0 port for USB HUB function.(black colored connector). 4 When you use Wireless USB mode and PC goes down to Standby mode, you cannot use USB Hub function since Wireless USB is disconnected to PC. 402 Using "HUB Monitor" 3 3 Connecting and Using a Source Device 3.1 Before Connecting 3.1.1 Pre-connection Checkpoints • Before connecting a source device, read the user manual provided with it. The number and locations of ports on source devices may differ from device to device. • Do not connect the power cable until all connections are completed. Connecting the power cable during connection may damage the product. • Check the types of ports at the back of the product you want to connect. 413 Connecting and Using a Source Device 42 3 Connecting and Using a Source Device 3 Connecting and Using a Source Device 3.2 Connecting and Using a PC 3.2.1 Connecting to a PC .. Select a connection method suitable for your PC. Connecting parts may differ in different products. Connection using the D-SUB cable (Analogue type) 1 Connect the D-SUB cable to the D-SUB port on the back of the product and the RGB port on the PC. 2 Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC. Audio is not available if the PC and product are connected via the D-SUB port. Connection Using an HDMI-DVI Cable 1 Connect an HDMI-DVI cable to the HDMI port on the side of the product and the DVI port on the PC. 2 Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC. Audio is not available if the PC and product are connected via the HDMI-DVI port. D-SUB HDMI IN 3 Connecting and Using a Source Device Connection Using an HDMI Cable (Digital Type) HDMI IN 1 Connect an HDMI cable to the HDMI port on the side of the product and the HDMI port on the PC. 2 Connect the DC power adapter to the product and a power socket, and turn on the power switch on the PC. Be sure to connect an audio output device such as headphones or speakers to [ ] on the product to hear audio. 433 Connecting and Using a Source Device 3 3 Connecting and Using a Source Device 3.2.2 Driver Installation • You can set the optimum resolution and frequency for this product by installing the corresponding drivers for this product. • An installation driver is contained on the CD supplied with the product. • If the file provided is faulty, visit the Samsung homepage (and download the file. 1 Insert the user manual CD provided with the product into the CD-ROM drive. 2 Click "Windows Driver". 3 Follow the instructions given on the screen to proceed with installation. 4 Select your product model from the list of models. 5 Go to Display Properties and check that the resolution and refresh rate are appropriate. Refer to your Windows OS manual for further details. PC System Requirements for Using the Product Your HUB Monitor is designed for notebook PC users; consider the following PC system requirements. Items Specifications CPU Core Core2Duo or higher CPU Speed 2.2 GHz or higher OS WINDOWS 7 or XP (Windows Vista is not supported) Graphics driver (WINDOWS 7, XP) Intel, AMD(ATI), Nvidia RAM 2GB • The operating system on your PC can affect the PC's performance for video or game playback. • It is recommended t...
Este manual também é adequado para os modelos :Monitores - C23A750X (8.04 mb)