Assessments - 0, GPA: 5
(
)
)
|
Fotos e especificações LG E1910S |
Facilidade de uso
If necessary, execute the WHITE BALANCE function again. This function will be enabled only when the input signal is an analog signal. 18 On Screen Display(OSD) Selection and Adjustment You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. 19 Sub-menus NOTE OSD (On Screen Display) menu languages on the monitor may differ from the manual. Menu Name Icons Button Tip Press the MODE Button, then the main menu of the OSD appears. Sub-menus Exit Adjust (Decrease/Increase) Restart to select sub-menu Icons E1910T/E1910S E2210T/E2210S On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description When F-ENGINE is not NORMAL,CONTRAST can not be selected. E1910T/E1910S NORMAL Select this when you want to use the product in the most general using environment. E2210T/E2210S E1910T/E1910S MOVIE Select this when you are watching a video or movie. E2210T/E2210S E1910T/E1910S INTERNET Select this when you are working on the document (Word etc.) E2210T/E2210S Exit : Exit , : Move : Select another sub-menu 20 On Screen Display(OSD) Selection and Adjustment (Only E2210T/E2210S) Main menu Sub menu Description Main menu Sub menu Description WIDE Switch to full screen mode according to input image signal. ORIGINAL Exit : Exit , : Move : Select another sub-menu Change the input image signal ratio to original. * This function works only if input resolution is lower than monitor ratio (16:10). 21 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description When PHOTO EFFECT is not NORMAL,CONTRAST can not be selected and COLOR is grey.When COLOR is selected down, PHOTO EFFECT is back to NORMAL and CONTRAST can be selected now. PHOTO EFFECT and F-ENGINE should not be unnormal at the same time. E1910T/E1910S E2210T/E2210S NORMAL The Photo Effect function is disabled. E1910T/E1910S GAUSSIAN This menu changes the screen to be moreBLUR colorful and smoother. E2210T/E2210S 22 On Screen Display(OSD) Selection and Adjustment Main menu Sub menu Description E1910T/E1910S E2210T/E2210S SEPIA This menu changes the screen to be Sepia tone (brown color). E1910T/E1910S E2210T/E2210S MONOCH This menu changed the screen to be-ROME Gray tone(black-and-white Picture) . Exit : Exit , : Move : Select another sub-menu 23 Troubleshooting Check the following before calling for service. 24 No image appears Do you see a "OSD LOCKED" message on the screen? Is the power cord of the display connected? Is the power indicator light on? Is the power indicator flickering? Do you see an "OUT OF RANGE" message on the screen? Do you see a "CHECK SIGNAL CABLE" message on the screen? • Check and see if the power cord is connected properly to the power outlet. • Press the Power button. • If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen. • Try to turn on the PC. • This message appears when the signal from the PC (video card) is out of horizontal or vertical frequency range of the display. See the 'Specifications' section of this manual and configure your display again. • This message appears when the signal cable between your PC and your display is not connected. Check the signal cable and try again. • You can secure the current control settings, so that they cannot be inadvertently changed. You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear. Do you see “OSD LOCKED” when you push MENU button? 25 Troubleshooting Display image is incorrect Display Position is incorrect. On the screen background, vertical bars or stripes are visible. Any horizontal noise appearing in any image or characters are not clearly portrayed. • Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, adjust the image position using the H position and V position icon in the on screen display. • Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the vertical bars or stripes using the CLOCK icon in the on screen display. • Press the AUTO button to automatically adjust your display image to the ideal setting. If the results are unsatisfactory, decrease the horizontal bars using the PHASE icon in the on screen display. • Check Control Panel --> Display --> Settings and adjust the display to the recommended resolution or adjust the display image to the ideal setting. Set the color setting higher than 24 bits (true color). IMPORTANT Check Control Panel --> Display --> Settings and see if the frequency or the resolution were changed. If yes, readjust the video card to the recommend resolution. If the recommended resolution (optimal resolution) is not selected, letters may be blurred and the screen may be dimmed, truncated or biased. Make sure...
Este manual também é adequado para os modelos :Monitores - E1910S-BN (4.51 mb)
Monitores - E2210S (4.51 mb)
Monitores - E2210S-BN (4.51 mb)