Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Change your hold on the product as it follows and turn the Stand Base in the arrow direction until you hear a "click." 5. Pull out the Stand to remove. A5 Connecting the Display To remove the Stand Base: 1.Hold the body of the Stand as it 2. Press the two latches at the same follows. time as it follows. 3. Pushing Latch inside, Take the stand 4. The body of the Stand and the Stand base from stand body. Base are successfully separated. A6 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display 1. Adjust the position of the panel in various ways for maximum comfort. Tilt Range: -5.~20. Swivel : 358.(The feature is not available for all countries) 20 L1753H / L1753HR / L1953H / L1953HR Height Range : maximum 3.94 inch (100 mm) 100 mm Warning: When adjusting height of the monitor, do not put your fingers between monitor and stand bottom. You may hurt your fingers. Ergonomic It is recommended that in order to maintain an ergonomic and comfortable viewing position, the forward tilt angle of the monitor should not exceed 5 degrees. A7 Connecting the Display Before setting up the monitor, ensure that the power to the monitor, the computer system, and other attached devices is turned off. Positioning your display L1753HM / L1953HM Height Range : maximum 2.36 inch (60 mm) 60 mm Note: When you use speakers, be sure to set up the stop cover first as shown. Then you use height function, the speakers will not touch the base cover. stop cover Stop cover is only for speaker models - L1753HM, L1953HM Warning: When adjusting height of the monitor, do not put your fingers between monitor and stand bottom. You may hurt your fingers. A8 Connecting the Display Using the Computer 1. Place the monitor in a convenient, well-ventilated location near your computer. 2. Connect the signal cable. When attached, tighten the thumbscrews to secure the connection. 3. Connect the power cord into a proper power outlet that is easily accessible and close to the display. 2 1 Wall-outlet type PC-outlet type DVI-D(This feature is not available in all countries.) MAC PC Power Cord Signal Cable Analog signal D-sub Digital signal DVI Varies according to model. 12 Mac adapter For Apple Macintosh use, a separate plug adapter is needed to change NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. PC the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. 4. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. (Only Analog Mode) NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. If you want to adjust the monitor while in use, or wish to manually run this function once again, push the ‘AUTO/SET’ button on the front panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on the OSD adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’. A9 Using the speakers -The feature is only for speaker models - L1753HM, L1953HM Side Jack Headphone/Earphone Input Automatically mutes the speaker volume when the headphones are plugged in. Rear AUDIO IN Audio Input Connects to the *LINE OUT jack of the PC sound card. *Line OutSpeaker Out
Monitores - L1753HR-BF (1.92 mb)
Monitores - L1753HR-SF (1.92 mb)
Monitores - L1953HR-BF (1.92 mb)
Monitores - L1953HR-SF (1.92 mb)