Assessments - 4, GPA: 3.8
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
If you wish to use an external hi-fi system, turn off the TV internal speakers. Press the ► button and then D / E button to select TV Speaker. Press the ► button and then D / E button to select ^ On or Off. • Press the MENU button to close the menu window. • Press the RETURN button to move to the previous menu screen. Audio Sound Mode Auto Volume Balance TV Speaker I Off V On AE FG OK RETURN 0 Audio Sound Mode Auto Volu Balance TV Speaker V Off On AE FG OK RETURN Audio Sound Mode Auto Volume TV Speaker AE FG OK RETURN 0 0 G 46 SOUND CONTROL I/II Stereo/Dual Reception When a programme is selected, the sound information for the station appears with the programme number and station Press the I/II button and then D / E button. --------- Broadcast On Screen Display Mono Stereo Dual MONO STEREO DUAL I, DUAL II, DUAL I+II V ■ Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono. In mono reception, the clarity of sound is improved. To switch back to stereo. ■ Language selection for dual language broadcast If a programme can be received in two languages (dual language), you can switch to DUAL I, DUAL II or DUAL I+II. DUAL I Sends the primary broadcast language to the loudspeakers. DUAL II Sends the secondary broadcast language to the loudspeakers. DUAL I+II Sends a separate language to each loudspeaker. NICAM Reception If the set is equipped with a receiver for NICAM reception, high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of broadcast received broadcast as follows by pressing the I/II button repeatedly. [1 When NICAM mono is received, you can select NICAM MONO or FM MONO. When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM MONO. When NICAM dual is received, you can select NICAM DUAL I, NICAM DUAL II or NICAM DUAL I+II or FM MONO. Speaker Sound Output Selection In AV, Component, RGB-PC, HDMI and DVI mode, you can select output sound for the left and right loudspeakers. Select the sound output. L+R: Audio signal from audio L input is sent to the left loudspeaker and audio signal from audio R input is sent to the right loudspeaker. L+L: Audio signal from audio L input is sent to left and right loudspeakers. R+R: Audio signal from audio R input is sent to left and right loudspeakers. 47 TIME SETTING CLOCK SETUP You must set the time correctly before using on/off timer function. If current time setting is erased by a power failure or the set is unplugged, reset the clock. Press the MENU button and then D / E button to select the Time menu. ^2 Press the ► button and then D / E button to select Clock. ^3 Press the ► button and then D / E button to set the hour. Press the ► button and then D / E button to set the minute. a ■1 1 Clock G Off Time 1 On Time Sleep Timer i Auto Sleep ' AE F G OK RETURN AUTO ON/OFF TIMER SETTING The Off time function automatically switches the set to standby at a preset time. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. The Off time function overrides the On timer function if both are set to the same time. O Press the ► button and then D / E button to select On/Off Time. • To cancel On/Off Time function, select Off. Press the ► button and then D / E button to set the hour. 43 Press the ► button and then D / E button to set the minutes. For On Time function only • Programme: Press the ► button and then D / E button to select the programme. • Volume: Press the ► button and then D / E button to adjust volume level at switch-on. Time I Clock 0 Ü On Time Sleep Timer Auto Sleep AE FG OK RETURN 07:00 PR Vol. Off 1 30 AE FG OK RETURN Off 48 Press the MENU button to close the menu window. Press the RETURN button to move to the previous menu screen. TIME SETTING SLEEP TIMER SETTING You do not have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. Press the MENU button and then D / E button to select the Time menu. Press the ► button and then D / E button to select Sleep Timer. Press the ► button and then D / E button to set the minute. Time Clock _ Off Time a On Time Sleep Timer s I Auto Sleep DE F G OK RETURN Off O NOTE ► When you switch the set off, the set releases the preset sleep time. AUTO SHUT-OFF SETTING If the set is switched on and there is no input signal, it will switch off automatically after 10 minutes. Press the ► button and then D / E button to select Auto Sleep. Press the ► button and then D / E button to select On or Off. Time Clock Off Time On Time Sleep Timer Auto Sleep V Off On DE ...
Este manual também é adequado para os modelos :Monitores - M227WA (2.54 mb)
Monitores - M227WA-PZ (2.54 mb)
Monitores - M237WA (2.54 mb)