Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Connecting the stand -Only on some models. 1. Take the parts for the stand out of the box and assemble them as shown in the picture. First, check if the following parts are all present. Stand (1)Screws (6) Parts Stand Cover(1) 2. Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture. 3. Use the screws to secure the stand on the rear side of the product as shown in the diagram. 1 Connecting the Stand cover -Only on some models. 1. Disassemble the stand cover. The cover may be easily disassembled by pressing up on the base as shown in the figure. Stand cover 2. After connecting the cables, correctly position the stand cover into the holes on the stand. If securely connected, you will hear the latch click into place. 2 Connecting the Speakers -Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. Type 1 When the speaker is installed. 3 Connecting the Speakers -Only on some models. Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. Type 2 After installing your speakers, use holders and cable ties to organize the speaker cables. 4 When the speaker is installed. * This feature is not available in all model. Remove the paper. Cable holder Cable tie * This feature is not available in all model. Using the Remote Control Name of the Remote Control Buttons • AV Button • Sleep Button When watching AV, RGB PC,HDMI/DVI ,Component1, Component2 The product will be automatically turned off after a certain period of time. Press this button repetitively to select an appropriate time duration • PSM Button -Toggles through preset video There is not a function which is supported • Menu Button • UP and Down buttons Bring up and down direction adjustment. • Mute button 1 2 3 4 5 6 7 8 0 9 * settings. • Power On/Off Button • Input Select Button (See next page) • ARC button Aspect Ratio Correction. Toggles through aspect ratio options. • Auto Button Automatic adjustment function (Operational for the analog signal only) There is not a function which is supported There is not a function which is supported • Exit Button • Volume Button Volume up and down • Check Button There is not a function which is supported 5 Name and Function of the Parts * The product image in the user’s guide could be different from the actual image. Rear View Power Connector : Connect the power cord Wired Remote Control Port RS-232C Serial Ports RGB, HDMI/DVI Ports PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card. AV Ports Speaker Ports *LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program (Refer to the Sound Card Manual). 6 Connecting to External Devices First of all, see if the computer, product and the peripherals are turned off. When Connecting to your PC Then, connect the signal input cable. When connecting with the D-Sub signal input cable. When connecting with the HDMI to DVI signal input cable (not included). MAC A B A PC PC/MAC Rear side of the product. Macintosh Adapter (not included) Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system) B PC (not included) * User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product. Rear side of the product. PC Connect the power cord. Rear side of the product. 7 Connecting to External Devices 1 Turn on power by pressing the power button on the product. AUTO/SET INPUT Power button 2 Turn on the PC. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SET Or, press the INPUT botton on the bottom of the product. INPUT AUTO/SET B A When connecting with a D-Sub signal input cable. • Select RGB PC : 15-pin D-Sub analog signal. When connecting with a HDMI to DVI signal input cable. • Select HDMI/DVI : HDMI to DVI Digital signal. Input AV Component1 Component2 RGB PC HDMI/DVI Input AV Component1 Component2 RGB PC HDMI/DVI 8 • How to connect to two computers. Connect the signal cables (HDMI to DVI and D-Sub) to each computer. Press the INPUT button on the remote control to select the computer to use. • Directly connect to a grounded power outlet or power strip (three prong connector.) Note Use this function when displaying ANALOG RGB inputs of a PC to the other product. RGB IN RGB ...