Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
. The screen blinks. • Check if the signal cable is properly connected and use a screwdriver to fasten if necessary. • Make sure the video card is properly inserted in the slot. • Set the color setting higher than 24 bits (true color) at Control Panel - Settings. • Check if the screen is set to interlace mode and if yes, change it to the recommend resolution. Have you installed the display driver? . Have you installed the display driver? . Do you see an "Unrecognized monitor, Plug&Play (VESA DDC) monitor found" message? • Be sure to install the display driver from the display driver CD (or diskette) that comes with your display. Or, you can also download the driver from our web site: • Make sure to check if the video card supports Plug&Play function. A18 Specifications W1942S Specifications W1942S Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 19 inches (48.14 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 19 inches viewable 0.285*0.285 mm pixel pitch Horizontal Freq. 28 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Max VESA 1440 x 900 @ 75 Hz Recommend VESA 1440 x 900 @60 Hz DDC 2AB On Mode : 36W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Width 44.84 cm / 17.65 inches Height 38.33 cm / 15.09 inches Depth 19.84 cm / 7.81 inches 6.32 cm / 2.49 inches Net 4.1 kg (9.11 lbs) Tilt -5.~ 20. AC 100-240V~ 50/60Hz 0.8A Operating Conditions Temperature 10.C to 35 .C Humidity 10 % to 80 % non-Condensing Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Attached ( ), Detached ( O ) Wall-outlet type or PC-outlet type Without Stand 44.84 cm / 17.65 inches 30.07 cm / 11.84 inches NOTE Information in this document is subject to change without notice. A19 Specifications W2042S Specifications W2042S Display Sync Input Video Input Resolution Plug&Play Power Consumption Dimensions & Weight Tilt Range Power Input Environmental Conditions Stand Base Power cord 20.1 inches (51.11 cm) Flat Panel Active matrix-TFT LCD Anti-Glare coating 20.1 inches viewable 0.258*0.258 mm pixel pitch Horizontal Freq. 28 - 83 kHz (Automatic) Vertical Freq. 56 - 75 Hz (Automatic) Input Form Separate TTL, Positive/Negative SOG (Sync On Green) Signal Input 15 pin D-Sub Connector Input Form RGB Analog (0.7 Vp-p/ 75 ohm) Max VESA 1680 x 1050 @60 Hz Recommend VESA 1680 x 1050 @60 Hz DDC 2AB On Mode : 40W(Typ.) Sleep Mode . 1 W Off Mode . 1 W With Stand Width 47.39 cm / 18.66 inches Height 39.04 cm / 15.37 inches Depth 19.84 cm / 7.81 inches 6.29 cm / 2.48 inches Net 4.5 kg (10 lbs) Tilt -5.~ 20. AC 100-240V~ 50/60Hz 1.0A Operating Conditions Temperature 10.C to 35 .C Storage Conditions Temperature -20.C to 60 .C Humidity 5 % to 90 % non-Condensing Attached ( ), Detach...
Este manual também é adequado para os modelos :Monitores - W1942S (1.28 mb)
Monitores - W1942S-PF (1.28 mb)
Monitores - W1942S-SF (1.28 mb)
Monitores - W1942S-SF.AEUFQPN (1.28 mb)