Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
[RGB IN] Using the DVI (Digital) connector on the video card. - Connect the DVI Cable to the DVI IN (HDCP) port on the back of your Monitor. [DVI IN (HDCP)] Connected to a Macintosh. -Connect the monitor to the Macintosh computer using the D-sub connection cable. If the monitor and the computer are connected, you can turn them on and use them. Connecting USB You can use a USB device such as a mouse, keyboard, Memory Stick, or external hard disk drive by connecting them to the DOWN port of the monitor without connecting them to the PC. The USB port of the monitor supports High-Speed Certified USB 2.0. High speed Full speed Low speed Data Rate 480 Mbps 12 Mbps 1.5 Mbps 2.5W 2.5W 2.5W Power Consumption (Max., each port) (Max., each port) (Max., each port) Connect the UP port of the monitor and the USB port of the computer with the USB cable. To use DOWN port, you have to connect the UP (Upstream Cable) to the PC. Make sure to use the USB cable supplied with this monitor to connect the monitor's UP port and your computer's USB port. Connect the DOWN port of the USB monitor and a USB device with the USB cable. The use procedures are as the same as those for using an external device connecting to the PC. • You can connect and use a keyboard and mouse. • You can play a file from a media device. (Examples of media devices: MP3, digital camera, etc.) • You can run, move, copy or delete the files on the storage device. (Examples of storage devices: external memory, memory card, memory reader, HDD-type MP3 player, etc.) • You can use other USB devices that can be connected to a computer. • When connecting a device to the DOWN port of the monitor, connect the device using a cable appropriate to the device. (For the purchase of the cable and external devices, ask the service center of the corresponding product.) • The company is not liable for problems or damages to an external device caused by using an unauthorized cable for the connection. • Some products do not follow the USB standard, and it may cause a malfunction of the device. • If the device malfunctions even if it is connected to the computer, contact the service center of the device/computer. USB monitor You can use this product as a monitor simply by connecting the power cable and the USB cable to your PC. Minimum hardware re quirements 1. When connecting one (1) or two (2) USB monitors Minimum hardware requirements: 1.2 GHz CPU / 512 MB memory Display: One monitor can support DVD quality resolution in full screen mode. ( It may not support a sufficient frame speed during playback.) 2. When connecting three (3) USB monitors Minimum hardware requirements: 1.8 GHz CPU / 1GB memory Display: One monitor can support DVD quality resolution in full screen mode. ( It may not support a sufficient frame speed during playback.) 3. Monitor connection: Multiple screens of 6 monitors Minimum hardware requirements: 1.6 GHz Dual core CPU / 1 GB memory Display: One monitor can support DVD quality resolution in full screen mode. ( It may not support a sufficient frame speed during playback.) When connectin g serially You can connect up to four (4) USB monitors serially. When connecting in parallel You can connect up to six (6) USB monitors in parallel. When connecting external devices to the USB monitor, you can only connect up to four (4) devices. Installation (Auto & Manual) Installing Your USB Monitor • Make sure to connect the USB cable and begin the installation after your PC has booted. • The auto installation will take about one minute. If you turn off your monitor or remove the USB cable while the installation is in progress, it may cause a problem with your PC and Windows OS. • The optimal resolution for this USB monitor is 1680 x 1050. If you connect your USB monitor to your PC, it recognizes the monitor and the "Found New Hardware" wizard is displayed, as shown in the figure below. Click "I Accept". The installation is started automatically and the installation progress window is displayed, as shown in the figure below. -Manual If the USB driver is not installed automatically, insert the provided USB Monitor Installation Install CD into the CD-ROM drive of your PC. ‘Double-click My Computer on the Windows Desktop and click on User Manual (I:). The volume name of the removable storage disk (for example, E:, F:, G: ) may be different depending on your computer environment. Right-click it and select 'Open' from the displayed menu. Double-click the 'Setup' file and an installation progress window is displayed, as shown in the figure below. The remaining steps are the same as for the automatic installation. Click "Next". Select "I accept the terms in the License Agreement" and click "Next". Click "Install". Click "Finish" to complete the installation. When setup is finished, a monitor icon is created in the system tray at the bottom of the monitor screen, and the information for the installed USB monitor is displayed. When the installation is completed, configure the fol...