Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Keep the User's Guide(CD) in an accessible place for future reference. See the label attached on the product and give the information to your dealer when you ask for service. Temporary noise is normal when powering ON or OFF this device. 1 - Only on some models. Connecting the stand 1. Take the parts for the stand out of the box and assemble them as shown in the picture. 2. Place a soft cloth on the table and put the product with the screen facing downward. Connect the stand as shown in the following picture. 3. Use the screws to secure the stand on the rear side of the product as shown in the diagram. Parts First, check if the following parts are all present. Screws (6) Stand (1) Cable management (1) 2 Connecting the Speakers Mount the product onto the speaker by using a screw as shown in the following connect the speaker cable. - Only on some models. When the speaker is installed. *Connect the input terminal with a proper color match. Remove the paper. Cable holder After installing your speakers, use holders and cable ties to organize the speaker cables. * This feature is not available in all model. Cable tie * This feature is not available in all model. To install Portrait -Only on some models. "When installing Portrait, rotate it clockwise based on its front." 33 Using the Remote Control Name of the Remote Control Buttons • AV Button • Sleep Button When watching AV, RGB PC,HDMI/DVI, Component The product will be automaticalloff after a certain period of ti Press this button repetitively to select an appropriate time duration • PSM Button -Toggles through preset video There is not a function which is supported • Menu Button • UP and Down buttons Bring up and down direction adjustment. • Mute button • Power On/Off Button • Input Select Button (See next page) • ARC button Aspect Ratio Correction. Toggles through aspect ratio options. • Auto Button Automatic adjustment function (Operational for the analog signal only) There is not a function which is supported There is not a function which is supported • Exit Button • Volume Button Volume up and down • Check Button There is not a function which is supported 44 y turned me. settings. Using the Remote Control • AV Button AV Component RGB PC HDMI/DVI Toggles through video • Input Select Button If you press the button once, the following Input Signal Window will appear. Select the signal type you want using the button. Input AV Component RGB PC HDMI/DVI ^Ў 55 1. Slide off the battery cover. 2. Insert the batteries with correct polarity (+/-). 3. Close the battery cover. • Dispose of used batteries in the recycle bin to prevent environmental pollution. Inserting batteries into remote control. AAA Type Name and Function of the Parts * The product image in the user's guide could be different from the actual image. Rear View Power Connector : Connect the power cord RS-232C Serial Ports RGB PC, HDMI/DVI Ports -HDMI Supports High Definition input and HDCP (High-bandwidth Digital Content Protection). Some devices require HDCP in order to display HD signals. PC Sound Jack : Connect the audio cable to the *LINE OUT jack of the PC sound card. Wired Remote Control Port AV Ports LAN Port Speaker Ports *LINE OUT A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume. If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program (Refer to the Sound Card Manual). 66 7 First of all, see if the computer, product and the peripherals are turned off. Then, connect the signal input cable. When connecting with the D-Sub signal input cable. When connecting with the HDMI to DVI signal input cable (not included). * When HDMI PC is used, a compatiblity problem might occur. MAC Macintosh Adapter (not included) Use the standard Macintosh adapter since an incompatible adapter is available in the market. (Different signaling system) Rear side of the product. Connecting to External Devices Connect the power cord. B A B A PC PC/MAC PC Rear side of the product. Rear side of the product. Rear side of the product. PC Connect the Audio cable. (not included) * User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product. When Connecting to your PC Connecting to External Devices Turn on power by pressing the power button on the product.1 Power button 2 Turn on the PC. Select an input signal. Press the INPUT button on the remote control to select the input signal. INPUT SETЎ^ Or, press the SOURCE button on the back of the product. Input AV Component RGB PC HDMI/DVI ^Ў SOURCE AUTO/SETЎ^ B A When connecting with a D-Sub signal input cable. • Select RGB PC : 15-pin D-Sub analog signal. When connecting with a HDMI to DVI signal input cable. • Select HDMI/DVI :...