Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
. You can only control Anynet+ devices using the product remote control, not the buttons on the product. . The product remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device. . Anynet+ works when the AV device supporting Anynet+ is in the standby or on status. . While in PIP mode, Anynet+ functions only when an AV device is connected as the primary display. It does not work if the AV device is connected as a secondary display. . Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type. Anynet+ Menu The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the product. Anynet+ Menu Description View PC Changes Anynet+ mode to PC mode. Device List Shows the Anynet+ device list. (device_name) MENU Shows the menu of the connected device menus. E.g. if a DVD player is connected, the disc menu of the DVD player will appear. (device_name) Tools Shows the tools menu of the connected device. E.g. if a DVD player is connected, the tools menu of the DVD player will appear. . Depending on the device, this menu may not be available. (device_name) Title Menu Shows the title menu of the disc in the connected device. E.g. If a DVD player is connected, the title menu of the movie in the DVD player will appear. . Depending on the device, this menu may not be available. Auto Turn Off Anynet+ (HDMI-CEC) Yes On Auto Turn Off Anynet+ (HDMI-CEC) Yes On Anynet+ (HDMI-CEC) -The displayed image may differ depending on the model. Auto Turn Off Setting an Anynet+ Device to turn Off automatically when the product is turned off. • No / Yes . If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off. . May not be enabled depending on the device. Switching between Anynet+ Devices 1 Press the TOOLS button, select Anynet+ (HDMI-CEC), and then press . 2 3 Select Device List, and then press the button. If you cannot find a device you want, select Refresh to refresh the list. Select a device, and then press the button. You can switch to the selected device. . The Device List menu appears only when you set Anynet+ (HDMI-CEC) to On in the System menu. . Switching to the selected device may take up to 2 minutes. You cannot cancel the switching operation while switching is in progress. . If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use the Anynet+ function. . Make sure to switch to an Anynet+ device by using the Device List. Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • You can connect only one receiver (home theater). • Check if the Anynet+ device power cord is properly connected. • Check the Anynet+ device’s Video/Audio/HDMI cable connections. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+setup menu. • Check whether the remote control is Anynet+ compatible. • Anynet+ doesn’t work in certain situations. (initial setup) • If you have removed and then reconnected the HDMI cable, please make sure to search devices again or turn your product off and on again. • Check if the Anynet+ function of the Anynet device is set on. I want to start Anynet+. • Check if the Anynet+ device is properly connected to the product and check if the Anynet+ (HDMI-CEC) is set to On in the Anynet+ System menu. • Press the TOOLS button to display the Anynet+ menu and select a menu you want. I want to exit Anynet+. • Select View PC in the Anynet+ menu. • Press the SOURCE button on the product remote control and select a non- Anynet+ device. The message “Connecting to • You cannot use the remote control when you are configuring Anynet+ or switching to a view mode. Anynet+ device ...” appears on the • Use the remote control after the product has completed Anynet+ configuration or has finished switching to Anynet+. screen. The Anynet+ device does not • You cannot use the play function when initial setup is in progress. play. Problem Possible Solution The connected device is not displayed. • Check whether or not the device supports Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ System menu. • Search Anynet+ devices again. • Anynet+ requires an HDMI connection. Make sure the device is connected to your product with an HDMI cable. • Some HDMI cables may not support Anynet+ functions. • If the connection is terminated because there has been a power failure or the HDMI cable has been disconnected, please repeat the device scan. The product sound is not output • Connect the optical cable between product and the receiver. through the receiver. Magic Clone MENU m : T System Magic Clone ENTER Magic Clone Clone From USB Clone to USB Export the product settings to a USB device or load the settings via a ...