Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• {VIDEO} - Select {On} to enter power saving mode when no signal is detected from the HDMI Video mode or YPbPr inputs after three successive cycles. Language Select the language used in the OSD menu. The options are: {} / {} / {....} / {} / {} / {} / {} / {} / {} / {....} . Panel saving Choose to enable the panel saving functions and thus reduce the risk of “image persistence” or “ghost-imaging”. • {Cooling Fan} - Select {On} to turn on the cooling fan all the time. Select {Auto} to turn on/off the cooling fan according to the display’s temperature. NOTES: • The default {Auto} option will start running the cooling fan if the temperature of 60°C (140°F) is reached, and stop running the cooling fan if the temperature of 58°C (136°F). • A temperature-warning message will be shown on the screen if the temperature reaches 69°C (156°F). All key functions except [Power] key will then be disabled. • Once the temperature reaches 70°C (158°F), the display power will be shut down automatically. • {Brightness} - Select {On} and the image brightness will be reduced to an appropriate level. The Brightness setting in the Picture menu will be unavailable when selected. • {Pixel shift} - Select the time interval ({Auto} / {10 ~ 900} Seconds / {Off}) for the display to slightly expand the image size and shift the position of pixels in four directions (up, down, left, or right). Activating Pixel Shift will disable H Position, V Position and Zoom Mode in the Screen Menu. Color system Selects the Color System depending on your input video format. The options are: {Auto} / {NTSC} / {PAL} / {SECAM} / {4.43NTSC} / {PAL-60}. NOTE: This item is functional for VIDEO input only. Network control port Select the network control port. Choose from: {RS232} / {LAN(RJ45)} / {Card OPS RS232}. NOTES: • If {LAN(RJ45)} is selected, then {RS232} will not be activated, even if a cable is attached, and vice versa. • The option {Card OPS RS232} is functional after connected with your OPS device. BDL5586XH Network settings Assign {IP address}, {Subnet Mask}, and {Default gateway} for the display. Network settingsNetwork host nameDHCPIP addressSubnet maskDefault gatewayLogin user nameLogin password9172255000- - - admin0[ SET ] change [SET] in STOREZDisable1625500L- - - 0000100- - - • DHCP - Choose to enable or disable the DHCP function. If enabled, the display will be assigned IP address, Subnet mask and Default gateway automatically. If disabled, you will be prompted to enter the following values manually. When finished, press [SET] button to store and save the chosen values. • IP address • Subnet mask • Default gateway • Login user name (The default user name is {admin}) • Login password (The default password is {0000}) Configuration reset Reset all settings in Configuration1 menu to the factory preset values. Factory reset Reset all settings in the OSD menus of {Picture}, {Screen}, {Audio}, {PIP}, {Configuration1}, {Configuration2}, and {Advanced option} to the factory preset values. Press [] or [] button to select [Reset], and then press [SET] button to do the reset. Factory resetCancelReset 4.2.6. Configuration2 menu OSD turn offInformation OSDOff timerOSD H-positionMonitor informationPictureScreenAudioPIPConfiguration1Configuration2Advanced optionOSD V-position OSD turn off Set the period of time the OSD (on-screen display) menu stays on the screen. The options are: {5 ~ 120} seconds. Information OSD Set the period of time the information OSD is displayed on the upper right corner of the screen. The information OSD will display when input signal is changed. The information OSD will remain on the screen with {Off} selection. The options are: {1 ~ 60} seconds. Off Timer Set the display to turn itself off to standby mode within an amount of time specified. The options are: {Off, 1 ~ 24} hours from currrent time. NOTE: When the “Off timer” is activated, the “Schedule” settings will be disabled. OSD H-position Adjust the horizontal position of the OSD menu. OSD V-position Adjust the vertical position of the OSD menu. Monitor information Shows information about your display, including model number, serial number, operating hours and software version. Monitor informationModel name: Serial no: Operation hours: SW Version: BDL5586XHVER 0.2040 H 3M 4.2.7. Advanced option menu Input resolutionHDMI clock thresholdBlack level expansionGamma selectionScan conversionFilm modeIR controlKeyboard controlTilingPictureScreenAudioPIPConfiguration1Configuration2Advanced optionScan modeHeat status Input resolution Set the resolution of the VGA input. This is only required when the display is unable to detect the VGA input resolution correctly. NOTE: This item is functional for VGA input only. The options are: • {1024x768 / 1280x768 / 1360x768 / 1366x768} • {1400x1050 / 1680x1050} • {1600x1200 / 1920x1200} • {Auto}: Determines the resolution automatically. BDL5586XH The selected settings will become effective after turning off the power and turning it on again. HDMI ...