Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
0 First remove the door (see section: "Re-Hanging Door"). 0 Pry out the eccentric pivot bushings at the top and/or at the bottom of the door as needed with a small screw driver, turn as shown in the diagram and press back into place. The diagram only shows a right opening door. For left opening doors please proceed accordingly at the left of the door at top and/or bottom. 0 Replace the door (see section: "Re-Hanging Door") Appliance Description View of Appliance (various models) . Freezer tray . Refrigerator compartments with lid(s) and drawers (for storage and freezing) . Drawer (for storage only) When defrosting, the bottom drawer serves as a water collecting vessel. Appliance Description Interior Illumination (not included with all models) The illumination switches on automatically when the appliance door is opened. By closing the appliance door it is automatically switched off. 3 If the appliance door remains open for more than 5 minutes, the interior illumination starts to blink and then switches off automatically in order to save energy. If directly after opening the door the interior illumination is not glowing although the appliance is in operation (recognisable through the green mains control indicator), the lamp is defective. Exchanging procedure is described in the chapter "Replace light bulb". Freezer tray A freezer tray is inserted at the very top of the freezer compartment at the back behind the freezer compartment flap. 3 Berries, for example, can be pre-frozen on the freezer tray. Advantage: The berries are not squeezed and maintain their natural form. The frozen berries can then be stored in compartments or drawers packaged in individual portions. Ice Packs (not included with all models) For some models two ice packs have been inserted into the freezer tray. Refer to the section "Prior to Initial Start-Up" concerning freezing of the ice packs. 3 In the event of power failure or a malfunction at the appliance, the ice packs extend the period of time after which unacceptable warming of frozen goods occurs by several hours. Ice packs may also be used, in passing, in cold storage bags. Appliance Description Control Panel 1 Stand-by display (green) 2 ON/OFF button 3 Temperature Display 4 Temperature regulator 5 Stand-by display for FAST FREEZE function (yellow) 6 FAST FREEZE button for fast freezing 7 Warning Display (red) 8 WARNING OFF button (see section: "Control and Information Systems") Temperature Regulator For temperature adjustment the temperature regulator must be freed from its recessed position. • Briefly pressing on the temperature regulator frees it from its recessed position. • Pressing on the temperature regulator returns it to its recessed position. SET means: With temperature regulator freed from recessed position; temperature which should exist in the freezer compartment (SET temperature), can be adjusted in increments of 1°C. ACTUAL means: With temperature regulator in recessed position; temperature display indicates current actual freezer compartment temperature (ACTUAL temperature). Appliance Description Temperature Display The temperature display shows several types of information. • In normal operation the current freezer compartment temperature is displayed (actual temperature). The temperature regulator must be in its recessed position. • During temperature adjustment, a blinking display of the temperature selected at the moment occurs (SET temperature). The temperature regulator must be freed from its recessed position. • During a mains power interruption a blinking display of the current freezer compartment temperature occurs (actual temperature). (not included with all models) • If, for example, the frozen goods were partially or completely thawed temporarily due to a lengthy power interruption, the temperature display alternately indicates: – the current freezer compartment temperature (actual temperature) and – the highest temperature to which the frozen goods have warmed. • If a malfunction has occurred at the appliance the temperature display alternately indicates: – the current freezer compartment temperature (actual temperature) and – an error message. The error message is coded (e.g. F1, F2, etc.) and assists the customer service technician in error diagnosis. If the temperature can no longer be registered, only the error code is displayed. FAST FREEZE Button By pressing the FAST FREEZE button the FAST FREEZE function is switched on. It speeds up freezing of fresh foods and, at the same time, protects already refrigerated goods against undesired warming. The appliance electronics automatically recognise when the FAST FREEZE function can be stopped, and switch it off automatically (after 30 to a maximum of 51 hours depending on amount to be frozen). The FAST FREEZE function can also be stopped manually at any time by pressing the FAST FREEZE button again. Prior to Initial Start-Up 0 Please clean the appliance interior and all accessories prior to initial start-u...