Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
WARNING: TO REDUCE THE RISK OF AN ELECTRIC SHOCK, DO NOT REMOVE THE FRONT OR BACK COVER. INSIDE THE UNIT, THERE ARE NO PARTS THAT CAN BE REPAIRED OR ADJUSTED BY THE USER. PLEASE REFER TO QUALIFIED TECHNICIANS. The triangular symbol with the exclamation highlights important points of which the user should refer to the manual regarding maintenance and repair. 2954 9/12/06 5:05 PM Page 08 Only connect the power cable to the AC outlet. When you want to use external loudspeakers, connect then to the LOUDSPEAKER JACKS (12), which can be found on the back of the machine. This machine should not be connected to loudspeakers which have an impedance of less than 8 ohm, otherwise the machine can be damaged. External loudspeakers are always activated together with the built-in ones. To connect the record player to a hi-fi system or an amplifier, please go about it in the following Connect the AUX OUTLET (13) of the record player to the AUX OUTLET of a hi-fi system or amplifier. Use a designated audio cable. Turn the Speaker/Aux switch (11) to the Aux position to activate the sound output through the AUX outlet. When the Speaker/Aux switch (11) is in the Speaker position, sound with be emitted through the built-in and external (if connected) loudspeakers. CONNECTIONS POWER CONNECTION LOUDSPEAKER JACK L/R AUX OUTLET manner. GENERAL ON/OFF BUTTON (5) VOLUME REGULATOR (2) FUNCTION SELECTION SWITCH (3) TUNER frequency band. FM: AM: 08. – Press the button to turn the machine on or off. The operation display (6) will light up when the machine is turned on. – Controls the loudspeaker volume. – Select the desired source AM: AM radio FM: FM radio Auto-stop ON: record player with activated auto-stop. The record motor will automatically turn off when the tone arm is near the middle of the record. Auto Stop OFF: Turntable with deactivated auto stop. The disc motor does not stop automatically, in order to be able to play discs with overlength. 1. Press the ON/OFF SWITCH (5) to turn on. 2. To select the desired frequency, turn the FUNCTION SELECTION SWITCH (3) to the desired 3. Press the FREQUENCY REGULATOR (7) to set the desired station. 4. Regulate the volume with the LOUDSPEAKER REGULATOR (2). TIPS FOR OPTIMAL RECEPTION The receptor has an FM wire antenna on the backside of the encasing. This antenna should be completely unwound for optimal reception. The machine has a built-in beam antenna. Turn the machine to find the position for the most optimal reception. 2954 9/12/06 5:05 PM Page 09 PHONO Note: Remove the protective cap of the stylus. Before operating, make sure that the tone arm is unlocked 09. on the tone arm holder. Lock the tone arm once again after the playing process. 1. Press the ON/OFF SWITCH (5) to turn on. 2. Turn the FUNCTION SELECTION SWITCH (3) to Auto Stop ON or Auto Stop OFF. 3. Select the correct playing speed, which is dependent on the particular recording, with the speed regulator. 4. Position the record on the record plate (use an adapter if necessary). 5. Lift the tone arm (9) off of the holder and lower it slowly onto the record. The record plate begins to turn. 6. Bring the tone arm to the desired position. 7. Select the desired volume with the volume regulator (2). 8. The turning of the record plate will automatically stop when the record has finished playing, if the function selection switch is in the Auto Stop ON position. Lift the tone arm (9) from the record and set it back on its holder. 9. To stop the playing manually, lift the tone arm (9) from the record and set it on its holder. 10. Please set the function button (3) to Auto Stop OFF in order to be able to play discs with overlength. TROUBLESHOOTING The ON/OFF BUTTON is on but the machine has no electricity. • Check the electric current entry of the wall outlet. • Check the power cable connection to the outlet. The operation display is on, but there is no sound from the loudspeakers. • Check the function selection switch. • The Speaker/Aux switch must remain in the Speaker position. • Check the set volume. The radio has bad FM reception. • Completely unwind the wire antenna for optimal reception. CARE ON/OF BUTTON After use, turn the machine off by pressing the ON/OFF BUTTON. Cleaning the machine. To maintain the outer attractiveness of the machine, simply clean it with a soft, clean cloth soaked in lukewarm water. Safety advice: • Do not connect the power cable to the outlet before all other connections have been made. • Do not expose the machine to drips or sprays. Replacing the stylus The replacement of a used needle can simply be carried out as follows. 1. Lift up the tone arm. 2. To replace the old needle, pull the pick-up diagonally down. Keep the sheath of the crown secure with your other hand. 3. Gently push the new needle into the holder (hold it firmly at the corner to avoid damaging the needle) until it engages. 2954 9/12/06 5:05 PM Page 010 SPECIFICATIONS Power supply: AC : Radio frequency range: AM : FM : Technical data is subje...