Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Example: To select number 25, press +10, +10 and 5. To select number 10, press +10 and 0. After listening, press TAPE/POWER/6STANDBY to turn the power off. NOTE • Do not use irregular shape CDs (example: heart- shaped, octagonal ones). It may result in malfunctions. • Do not place more than one disc in the disc compartment. • Do not try to open the disc compartment during play. • Do not touch the lens. Doing so may cause malfunctions. • The unit may not play a CD-R/RW disc that is recorded on personal computers or some kinds of CD-R/RW recorders because of differences in recording platforms. • Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. It may cause malfunction. • Do not load an unrecorded CD-R/RW disc. It will take over 30 seconds to read the disc. The disc may be damaged if you try to open the disc compartment while reading the disc. 6 ENGLISH 0-9, +10 REPEAT aPAUSE cPLAY r, t. SKIP/SEARCH sSTOP (CSD-TD66 only) PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. 1 In stop mode, keep *sSTOP/MEMORY pressed until “M” flashes in the display. * or son the remote control (CSD-TD66 only) 2 Press r, tto select a track, then press sSTOP/MEMORY to store it. Track number Programmed number To select a track with the remote control (CSDTD66 only) Press the numbered buttons 0-9 and +10. 3 Repeat step 2 to program other tracks. 4 Keep sSTOP/MEMORY pressed until “M” stops flashing to finish the program. “M” remains displayed and indicates the unit stores the programmed tracks. 5 Press eto start play. To check the program, press ror tin stop mode. To clear the program, press sonce in stop mode so that “M” disappears in the display. To change the programmed tracks, clear the program and repeat all the steps again. Specifications Tuner section Frequency range, antenna — FM: 87.5 - 108.0 MHz Rod antenna, AM: 530/531 - 1,710/1,602 kHz (10/9 kHz step) Ferrite bar antenna Deck section Track format — 4 tracks, 2 channels / Frequency range — Normal tape: 50 - 12,500 Hz (EIAJ) / Recording system — AC bias / Erasing system — Magnet erase / Heads — Recording/playback head (1), Erasure head (1) CD player section Disc — Compact disc / Scanning method — Non- contact optical scanner (semiconductor laser) General Speaker — 100 mm cone type (2) / Output — Headphones jack (stereo mini-jack) / Power output — 2.5 W + 2.5 W (EIAJ 7 ohms, T.H.D. 10% DC) / Power requirements — DC 12 V using eight size C (R14) batteries, AC 120 V, 60 Hz / Power consumption — 15 W / Dimensions (W . H . D) — 414 . 183 . 235 mm (16 3/8 . 71/4 . 93/8 in.) / Weight (excluding batteries) — 3.2 kg (7 lbs. 1 oz.) / Accessory — Remote control (1, CSD-TD66 only), AC cord (1) Specifications and external appearance are subject to change without notice. COPYRIGHT Please check the copyright laws relating to recordings from disc, radio or external tape for the country in which the machine is being used. If an erroneous display or malfunction occurs Make sure that none of the deck operation buttons is pressed. Press swhile pressing TAPE/POWER/6STANDBY. If the unit cannot be reset in the way above, disconnect the AC cord and remove all the batteries to turn off the display. Leave the unit for a while and turn the power back on. En ENGLISH 7 TAPE/POWER/ 6STANDBY RADIO/BAND QSOUND T-BASS r, t CD VOLUME N, M REPEAT/SLEEP 3-MODE EQUALIZER s STOP/MEMORY C PAUSE STOP/EJECT FF REW PLAY REC DISPLAY EQ VOL i, kr, t (CSD-TD66 only) TAPE/POWER/ 6STANDBY RADIO/BAND QSOUND T-BASS r, t CD VOLUME N, M REPEAT/SLEEP 3-MODE EQUALIZER s STOP/MEMORY C PAUSE STOP/EJECT FF REW PLAY REC DISPLAY EQ VOL i, kr, t (CSD-TD66 only) TAPE OPERATIONC Use Type I (normal) tapes only. INSERTING A TAPE Press ZSTOP/EJECT to open the cassette holder and insert a tape with the exposed side up and the side to be played facing out. Push the cassette holder to close. PLAYING A TAPE Press xPLAY while the power is off. The power is turned on and play of the inserted tape begins. The volume level is displayed during tape operation. ZSTOP/EJECT – Stops play. The power will be automatically turned off. aPAUSE – Pauses play. To resume play, press again. fFF/ gREW – Fast forwards/ rewinds. To stop the winding, press Z. To prevent accidental erasure Break off the plastic tabs on the cassette tape with a screwdriver or other pointed tool after recording. To record on the tape again Cover the tab openings with adhesive tape, etc. Side A Tab for side A RECORDING Note that recording is done on only one side of the tape. 1 Insert a tape with the side to be recorded facing out. 2 Get ready to record from the source. To record from a CD, press CD and load the disc. To record from a radio broadcast, press RADIO/ BAND and tune to a station. 3 Press wREC to start recording. xPLAY is pressed simultaneously. When the selected function is CD, CD play and recording starts simultaneously. To record only the selected tracks of a CD 1 Follow steps 1 to 4 of PROGRAMMED ...
Este manual também é adequado para os modelos :Stereo - CSD-TD66 (322.34 kb)
Stereo - CSD-TD26 (322.34 kb)
Stereo - CSD-TD28 (322.34 kb)