Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
When pressing CD n on the remote control, recording and CD play stop simultaneously. When pressing DISP in stop mode, the remaining recordable time is displayed for 4 seconds. To record on a previously recorded MD If there is an unrecorded section left on the MD, the new recording automatically starts from where the previous recording finished. If you want to start recording from the beginning of a previous recorded MD, erase the previous recording completely. (See page 21.) T. OVER is displayed when: The remaining recordable time of the MD is not enough to record a whole CD. Press n STOP and replace the MD with another one. If it does not matter whether recording is cut short or not, press CD F MD again to start recording. Registering the index mark automatically -When recording from a CD, the index mark information recorded on the CD is copied as it is. 2nd 3rd 4th track track track CD Recording (MD) 2nd 3rd 4th track track track A A AA A : Index mark -When recording from the radio, the index mark information is registered every 5 minutes. There may be a case where index marks are not registered accurately. RECORDING ONLY ONE TRACK PROGRAMMED RECORDING OF A CD Up to 16 tracks can be programmed and recorded from the inserted CD. 0000 0000 0000 0000 — 3Y 0000 n..-. 0000 Q o u+3 ; “z bii 1 Insert a recordable MD into the disc drive with I 1= the label side up and in the direction of the arrow. 1 Insert a recordable MD into the disc drive with2 Press CD >11 to select CD function and load a the label side up and in the direction of the CD. arrow. 3 Select the track that you want to record with 2 Press CD -11 to select CD function and load a JOG DIAL or the numbered buttons on the CD. remote control. 3 Press PROGRAM* in stop mode. 4 Press CD -MD to start recording. PROG is lit upon the display. The selected track is recorded. * or PRGM on the remc)te control If the track to be recorded is playing when CD -MD is 4 Press the numbered buttons to program tracks. pressed, the CD returns to the beginning of the selected track to be recorded. 5 Press CD E MD to start recording. Recording begins. When the programmed tracks finish playing, the recording stops automatically. When the recording finishes, TOC-EDIT flashes while the data concerning the contents of the recording are registered. The index mark is registered automatically at the beginning of each track in the programmed order. When the track of the CD finishes playing, the recording stops automatically and the CD goes to the next track. When the recording finishes, TOC-EDIT flashes while the data concerning the contents of the recording are registered. The index mark is registered automatically at the beginning of the track. m While TOC-EDIT flashes on the display, do not disconnect the AC cord or shake the unit. Otherwise, the TOC data is not registered properly. l During CD -MD recording, pause cannot be selected. ENGLISH 15 RECORDING FROM THE RADIO OR EXTENDED RECORDING A CD MANUALLY MONAURAL RECORDING This section explains how to record from the radio or a CD from a point selected manually. 2——————% — 4 5 2 1 ENTER 2 3 Insert a recordable MD into the disc drive with the label side up and in the direction of the arrow. Prepare the source to be recorded. To record from the radio, press RADIO/BAND and tune in a station. To record from a CD, press CD @II to select CD function and load a CD. Then select the track that you want to record with JOG DIAL or ~, -. Press REC. The unit enters the standby mode and waits until the recordable remaining time is displayed. Remaining recordable time of the MD Source to be recorded Press MD -11 to start recording. Press n STOP to stop recording. When recording finishes, TOC-EDIT flashes while the data concerning the contents of the recording are registered. When pressing DISP in stop mode, the remaining recordable time is displayed for 4 seconds. To add index marks during recording Press ENTER at the desired point during recording. By using the monaural recording mode, the available time printed for recording on the MD can be doubled. In this case, the recording is monaural. Extended recording is applicable when recording from the radio only. MD~ RADIO FMIAM 1 Insert a recordable MD into the disc drive with the label side up and in the direction of the arrow. 2 Press RADiO/BAND* to select a band and tune in a station. * or RADIO FM/AM on the remote control 3 Press REC. The unit enters the standby mode and waits until the recordable remaining time is displayed. 4 Press MODE* repeatedly until MONO REC is displayed. MONO flashes * or REC MODE on the remote control 5 Press MD >11 to start recording. 6 Press n STOP* to stop recording. When recording finishes, TOC-EDIT flashes while the data concerning the contents of the recording are registered. * or MD n on the remote control To restore stereo recording Press MODE repeatedly unt~ STEREO REC is displayed in step 4. m There may be a case where index marks are not registered accur...