Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Place a disc with the printed side up and close the disc compartment. PUSH OPEN Total number of tracks and total playing time are displayed. It will take about 15 seconds when loading a CD-RW disc. 3 Press ePLAY/PAUSE to start play. The number of the track being played and elapsed playing time are displayed. sSTOP/SET/CLEAR* – Stops play. * or sSTOP on the remote control (CSD-TD49 only) ePLAY/PAUSE – Pauses play. To resume play, press again. f, g– Searches for a particular point during playback. Hold down for gand then release it. – Skips to the beginning of a track. Press for g repeatedly. To start play when the power is off, press CD. The power is turned on and play of the loaded disc begins (Direct Play Function). If you load a disc while the display flashes in step 2, play starts without pressing e. To select a track directly with the remote control (CSD-TD49 only), press the numbered buttons 0-9 and +10. CD play starts from the selected track and continues to the last track. Example: To select number 25, press +10, +10 and 5. To select number 10, press +10 and 0. After listening, press POWER 6STANDBY/ON to turn the power off. NOTE • Do not use irregular shape CDs (example: heart- shaped, octagonal ones). It may result in malfunctions. • Do not place more than one disc in the disc compartment. • Do not try to open the disc compartment during play. • Do not touch the lens. Doing so may cause malfunctions. • The unit may not play a CD-R/RW disc that is recorded on personal computers or some kinds of CD-R/RW recorders because of differences in recording platforms. • Do not attach any seal or label to either side (the recordable side or the labeled side) of a CD-R/RW disc. It may cause malfunction. • Do not load an unrecorded CD-R/RW disc. It will take over 30 seconds to read the disc. The disc may be damaged if you try to open the disc compartment while reading the disc. 8 ENGLISH f, g sSTOP (CSD-TD49 only) f, g sSTOP (CSD-TD49 only) 0-9, +10 REPEAT e PLAY/PAUSE PROGRAMMED PLAY Up to 30 tracks can be programmed from the disc. 1 In stop mode, hold down sSTOP/SET/ CLEAR* until “M” flashes in the display. The program number, “P-01” is also displayed. * or sSTOP on the remote control (CSD-TD49 only) 2 Press for gto select a track, then press sto store it. Selected track number Total playing time of Next program number the selected tracks Pressing the numbered buttons 0-9 and +10 on the remote control selects and stores the track at the same time (CSD-TD49 only). 3 Repeat step 2 to program other tracks. 4 Hold down sto finish the program. Total number and total playing time of the selected tracks are displayed. Total playing time of the selected tracks Total number of the selected tracks Pressing efinishes the program and starts programmed play. To check the program, press for g. To clear the program, press sonce in stop mode so that “M” disappears in the display. To change the programmed tracks, clear the program and repeat all the steps again. NOTE The total playing time of the selected tracks will be displayed as “ ”: -When it exceeds “99:59”. -When a track number 31 or higher is selected. REPEAT, RANDOM PLAY A single track or all tracks can be played repeatedly, and all the tracks randomly. Random play can be repeated as well. Press REPEAT/MODE/SLEEP* repeatedly. The mode changes as follows: : Repeats a single track. Select a track with f or g. : Repeats all the tracks. RANDOM: Plays all the tracks randomly. RANDOM and : Plays all the tracks repeatedly in random order. To cancel, press the button repeatedly so that and/ or RANDOM disappears. * or REPEAT on the remote control (CSD-TD49 only) NOTE • During random play, you cannot skip back to the previous track with f. • When selecting a track with the numbered buttons, random play is canceled. • During programmed play, you cannot select RANDOM and . En ENGLISH 9 e PLAY/PAUSE POWER 6STANDBY/ON REC f, g TAPE s STOP/SET/CLEAR REPEAT/MODE/ SLEEP TAPE OPERATION C • Use Type I (normal) tapes only. • The unit plays (records on) the side facing up. PLAYBACK 1 Press TAPE. The power is turned on. 2 Press PUSH EJECT to open the cassette holder and insert a tape with the side to be played facing out and the exposed side facing down. PUSH EJECT Press PUSH EJECT to close. 3 Press ePLAY/PAUSE to start playback. To set the tape counter to “0000” Press sin stop mode. The counter is also set to “0000” when opening the cassette holder. sSTOP/SET/CLEAR* – Stops play. * or sSTOP on the remote control (CSD-TD49 only) ePLAY/PAUSE – Pauses play. During pause mode, the tape counter flashes. To resume play, press again. f/g– Rewinds/ fast forwards. To stop the winding, press s. To start play when the power is off, press TAPE. The power is turned on and play of the loaded tape begins (Direct Play Function). If you load a tape while the display flashes in step 2, play starts without pressing e. After listening, press POWER 6STANDBY/ON to turn the power off. Tape counter 10 ENGLISH MODE...
Este manual também é adequado para os modelos :Stereo - CSD-TD49 (271.43 kb)