Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
Then put back the tone arm to the rest position. PLAYING COMPACT DISC .. LOADING THE DISCS 1. Press “CD” button. 2. Press “OPEN/CLOSE” button to open the CD door. 3. Place a CD with the printed side facing up inside the tray. 4. Press the “ ” or “ DISC-CH” button to turning the CD tray, and loading out the other disc compartment. 5. Press the “OPEN/CLOSE” button again to close the CD door. 6. CD search is performing; the display will show the total number of disc, number of tracks and playing time of disc. Note: CD searching will be performed every time when switching to CD mode or closing the CD door. All CD functions will be responded only after the CD searching is completed. .. CD PLAY / PAUSE MODE 1. Press the “PLAY/PAUSE” button to start playback, the first track of the first disc will be played and the play indicator will appear on the LCD display. 12 2. or press either the “ DISC 1”, “ DISC 2 ”, “ DISC 3 ” button, unit will play the disc inside the desire tray directly. 3. To interrupt, press the “ PLAY/PAUSE ” button once, and the display will start flashing. Press again to resume playback. .. STOP MODE 1. If “STOP” button is pressed during PLAY or PAUSE mode, system will go to stop mode. .. SKIP MODE (SKIP UP /SKIP DOWN ) 1. During PLAY or PAUSE mode, if “SKIP +” button is pressed it will go to next track and display the track no. and then remain the PLAY or PAUSE mode. 2. During PLAY or PAUSE mode, if “SKIP -” button is pressed. It will go back to the beginning of the track, original track no. is display and remains the play or pause mode. 3. After step 2, press “SKIP -” button again will go to the previous track and remain the play or pause mode. .. SEARCH MODE (SEARCH UP /SEARCH DOWN ) 1. During PLAY mode, if “SEARCH +” button is pressed & hold for few seconds, it will start searching forward. 2. During play mode, if “SEARCH -” button is pressed & hold for few seconds, it will star searching backwards. .. REPEAT PLAY This function allows to repeat 1 single track, 1 single disc or all discs:- Press the “REPEAT” keys repeatedly to switch the function:- REP. ALL DISC REP. 1 DISC REP. 1 TRACK REP. OFF Note: Single track repeat function is possible in normal or programmed playback, repeat one disc or all discs is only available in normal playback. ..• RANDOM PLAY You can listen all the tracks of all available discs in a random order by this function 1. Press “RANDOM” button once, unit will play all disc randomly; press again, unit will play 1 disc randomly. 2. Press “PLAY/PAUSE” button to start random playback. 3. All tracks of all discs or all tracks of 1 disc will be started playback in random order. 4. Press “RANDOM” button again to cancel random mode. .. INTRO PLAY (BY REMOTE ONLY) You can listen the beginning (10 seconds) of each track in a CD by this function & saving your time to search the desire song 1. Press “INTRO” button after placing a CD inside the unit at CD mode 2. System start playing the first 10 seconds of each track of the entire CD continuously. 3. Press “INTRO” button once again when it reach your desired track for normal playback. .. REMAIN FUNCTION (BY REMOTE ONLY) In CD playback mode, press to check the remain time on LCD display during CD playback Press “REMAIN” button repeatedly to switch the function as below: TRACK PLAYING TIME TRACK REMAINING TIME DISC REMAINING TIME DISC PLAYING TIME 13 CD PROGRAMMING Up to 60 tacks can be programmed to be programmed to be played in any required order from one CD or all CDs in the CD changer. 1. Set in CD mode and press the “STOP ” button. 2. Press the MEM/CLK-ADJ button 3. Press the “ ” to select the desired disc. 4. Press SKIP DOWN or UP button to select the desired track. 5. Press the “MEM/CLK-ADJ” button again to store the track in memory. 6. Repeat steps 2 to 5 to enter additional program 7. Press “PLAY/PAUSE” button to start playback in order. 8. Press “STOP ” button to stop playback and press it twice to clear all programmed tracks. LISTING TO TAPE GENERAL OPERATION STOP / EJECT KEY Press to stop all deck operation. Press again to open the cassette door. FAST FORWARD KEY Press to start rapid tape winding in either forward or reveres & REWIND KEY direction. Press stop / eject key when the cassette spools stop turning. PLAY KEY Press to start playing tape. PAUSE KEY Press to stop tape operation temporarily. Press again to resume. RECORD KEY Press together with play key to start tape recording. (DECK 1 ONLY) PLAYBACK .. Press “TAPE” button to active tape function .. Put in the cassette tape. .. Press PLAY key to active playback .. Adjust the volume control to the desired level. .. Use PAUSE key when you want to stop playback temporarily. .. Press STOP / EJECT key when finished. RECORDING This cassette recorder features an Automatic Recording Volume Level Control System that prevents overloaded or distorted recordings. You can change the volume level as often as you like during the recording process. It will not have any effect on th...