Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
3 Turn the Rotary encoder to select the desired letter/numeral/symbol available for naming. 4 Press Rotary encoder to store the first character. The first character will stop blinking and the display will automatically advance to the next character. When that character begins to blink, you may choose the next letter or symbol of your title. 5 Repeat steps 3 and 4 above to complete the titling. Pressing the Rotary encoder after entering the 8th character automatically stores the title into memory. When entering a title of less than 8 characters (for example, 3 character title): After entering 3 characters, the 4th character space will be blinking. Go to step 6 to complete the title. 6 Press TITLE to record the title. • If you cancel while entering a title, selected characters are not written. •You can enter 24 radio station titles and 18 CD titles on this unit. If you try to store beyond the limit, the display will show “FULL DATA.” At this point, no more titles can be stored. To input a new title, one of the previously inputted titles must first be deleted. • The CD Changer title length or memory capacity varies depending upon the model being used. • When you want to erase a title, enter the “ ” (“ ” for CDA9830) symbol into all spaces. • The operations described in steps 3 to 5 must be made within 10 seconds. The input mode will be canceled if no action is taken for over 10 seconds. 2 3 Press and hold -/J for at least 2 seconds. The title in the display will blink. Press g or f repeatedly until the title you want to erase is displayed. 4 Press and hold -/J for at least 2 seconds to erase the title displayed. 5 Press TITLE to cancel the title erasing mode. •You cannot erase CD-TEXT. • "NO DATA" is displayed for 2 seconds if the title is not input in step 2, or if all titles are erased in step 4. Displaying Time Press TITLE repeatedly until the time is displayed. Each press changes the display. For details, see “Displaying the Title/Text” (page 19). • Selecting any tuner or CD function while in the clock priority mode will interrupt the time display momentarily. The function selected will be displayed for about 5 seconds before the time returns to the display. • When the power is off but the ignition key is on, press TITLE to display the time. Blackout Mode On and Off When Blackout mode is turned on, the display will turn off to reduce power consumption. This additional power enhances the sound quality. Press and hold DISP/B.OUT for at least 2 seconds to activate the blackout mode. The display will turn off. • If any button on the unit is pressed during the blackout mode, the function will be displayed for 5 seconds to show the operation before returning to Blackout mode. To cancel Blackout mode, press and hold DISP/B.OUT for at least 2 seconds. 20-EN Setting an Amplifier Link (CDA-9831 only) With an external Amplifier Link compatible amplifier MRD-M501 or MRD-M301 is connected, the amplifier settings are adjustable from the head unit. A maximum of 8 external amplifiers can be adjusted. 1 Press and hold MENU for at least 2 seconds. 2 Press MENU to select A-Link. 3 Press g or f to select AMP1 to 8, or BASS VOLUME. To set the BASS VOLUME 4 Turn the Rotary encoder to adjust the level, then press the Rotary encoder. 5 When the adjustment has been completed, press MENU to select RETURN. The unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. To set the Amplifier 4 Press BAND/TEL. to select from the following setting items to be adjusted. INPUT > LOW PASS > SUBSONIC > P-EQ > BASS COMP > T.CORR > PHASE > TURN ON DELAY> OUTPUT DISABLE (SAFE) > INPUT 5 Turn the Rotary encoder to change the settings. 6 Press the Rotary encoder. Repeat steps 5 and 6 (above) if there are other items to set in step 4. 7 Repeat the steps 4 to 6 (above) if other settings will be adjusted. To set another amplifier, return to the step 3. To store the adjusted contents 1) While adjusting the mode, press and hold either button (1 or 2) for at least 2 seconds. The adjusted contents are stored. To recall adjusted and stored contents 1) While adjusting the mode, press either button (1 or 2). The adjusted and stored contents are recalled. 8 When adjustment has been completed, press MENU to select RETURN. The unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. To easily recall adjusted and stored contents 1) Press MENU to select A-Link. 2) Press g or f to select AMP 1 to 8. 3) Turn the Rotary encoder to select Preset 1 or Preset 2. 4) Press MENU to select RETURN. The unit returns to normal mode. Pressing and holding MENU for at least 2 seconds will return to normal mode. •For details of each of the settings, refer to the Owner's Manual of the external amplifier. • If amplifier settings are made on the CDA-9831 model, do not then change the setting with the amplifier buttons as the amplifier display may not match the operations of the CDA-9831...
Este manual também é adequado para os modelos :Stereo - CDA-9831 (916.72 kb)