Assessments - 4, GPA: 4.3
(
)
)
|
Facilidade de uso
replay the program Press [PROGRAM] then [CD 6]. check program contents Press [ /REW/4] or [ /FF/.] when “PGM” is displayed in the stop mode. To check while programming, press [PROGRAM] twice after “PGM” appears, then press [ /REW/4] or [ /FF/.]. add to the program Repeat step 3 in the stop mode. Repeat steps 3 to 5 in the stop mode. clear the last track Press [DEL] in the stop mode. clear all programmed tracks Press [CLEAR] in the stop mode. “CLR ALL” is displayed. CD MP3 WMA Note • When you try to program more than 24 tracks, “PGM FULL” appears. • The program memory is cleared when you open the disc lid. CD During program play, you can search backward or forward only within the current track. Note • This unit can play MP3 or WMA files and CD-DA format audio CD- R/RWs that have been finalized. • It may not be able to play some CD-R/RWs, depending on the condition of the recording. • Do not use irregularly shaped discs. • Do not use discs with labels and stickers that are coming off or with adhesive exuding from under labels and stickers. • Do not attach extra labels or stickers on the disc. • Do not write anything on the disc. CD • This unit can access up to 99 tracks. • Choose a CD with this mark: Using DualDiscs The “CD” sides of DualDiscs do not meet the CD-DA standard so it may not be possible to play them on this unit. MP3 WMA • Files are treated as tracks and folders are treated as albums. • This unit can access up to 999 tracks, 255 albums and 20 sessions. • Disc must conform to ISO9660 level 1 or 2 (except for extended formats). • To play in a certain order, prefix the folder and file names with the 3-digit numbers in the order you want to play them. MPEG Layer-3 audio decoding technology licensed from Fraunhofer IIS and Thomson multimedia. Windows Media, and the Windows logo are trademarks, or registered trademarks of Microsoft Corporation in the United States and/or other countries. WMA is a compression format developed by Microsoft Corporation. It achieves the same sound quality as MP3 with a file size that is smaller than that of MP3. RQTV0080 8 Cassette tape Cassette tape Disc lid CD OPEN/CLOSE 0Top of unit ENGLISH Basic playBasic play Press [0] and insert the cassette. 1 Forward side Insert inside the guides Close the lid by hand. 2 Press [TAPE 3] to start play. 3 To play the other side of the cassette, turn the cassette over. To Action stop tape playback Press [ 7 ]. start one-touch play Press [TAPE 3] when the unit is OFF with the cassette loaded. fast-forward and Press [ /REW/4] or [ /FF/.] in the rewind stop mode. Note • Tapes exceeding 100 minutes are thin and can break or get caught in the mechanism. • Endless tapes can get caught up in the deck’s moving parts if used incorrectly. TPS (Tape Program Sensor)TPS (Tape Program Sensor) This function enables you to search the beginning of a track, up to a maximum of 9. Press [ /REW/4] or [ /FF/.] during play. Play resumes from the track found. Note TPS may not function properly: • with short silent parts • when noise occurs between tunes • if silent parts are found within tunes RecordingRecording Use normal position tapes. High position and metal position tapes can be used, but this unit will not be able to record or erase them correctly. Preparation Wind the leader tape so that recording can begin immediately. Recording the radioRecording the radio 1 Insert the cassette to be recorded. 2 Tune to the required station (refer to page 10). 3 Press [¶ REC/8] to start recording. Recording discs Recording discs Insert the cassette to be recorded. 1 Push [CD OPEN/CLOSE 0] to insert the disc and 2 close the lid. Press [CD 3/8] and then [7, –DEMO]. 3 Press [PLAY MODE] to select your desired mode 4 (refer to page 7). Press [¶ REC/8] to start recording. 5 Recording programmed tracks Recording programmed tracks Insert the cassette to be recorded. 1 Program the tracks you want (refer to page 8). 2 Press [¶ REC/8] to start recording. 3 Other basic operationsOther basic operations To Action erase a recorded 1) Insert the cassette to be recorded. sound 2) Press [TAPE 3] and then [7, –DEMO]. 3) Press [¶ REC/8]. stop recording Press [ 7 ]. stop recording 1) Press [¶ REC/8]. temporarily 2) Press again to resume recording. record on the other Turn the cassette over and press side of the tape [¶ REC/8]. Erasure preventionErasure prevention The illustration shows how to remove the tabs to prevent recording. To record on the tape again, cover as shown. To re-record Side A Normal tape Tab for side B Tab for side A Adhesive tape RQTV0080 9 Radio Radio Numeric buttons Memory presetMemory presetManual tuningManual tuning Press [TUNER/BAND] to select “FM” or “AM”. 1 Press [PLAY MODE] to select “MANUAL”. 2 Press [ /REW/4] or [ /FF/.] to select the 3 frequency of the required station. “ ST ” is displayed when a stereo FM broadcast is being received. To tune automatically Press [ /REW/4] or [ /FF/.] for a moment until the frequency starts changing rapidly. The unit begins a...