Assessments - 6, GPA: 3.5
(
)
)
|
Facilidade de uso
The music source is selected automatically in default setting. To set the conditions for selection, refer to “Auto input condition” on page 14. To select the music source manually, refer to “Input mode” on page 14. 4 Adjust the microphone volume by rotating MIC. When different microphone volumes are not balanced, adjust MIC VOL using a flathead screwdriver. 5 Adjust the ECHO amount by rotating ECHO. 6 Adjust the key by rotating KEY CONTROL. ¦ Notes for the proper use of microphones • Sing into the microphone by holding it at a distance of 5 to 10 cm (2 to 3-15/16”) from your mouth. • To ensure clear sound, grasp the microphone below the mic head. • Do not block the lower part of the windscreen. This will disturb proper voice reproduction with unclear bass. Howling also tends to occur in such cases. 5 to 10 cm (2 to 3-15/16”) away from your mouth. Grasp the microphone below the head. OPERATION English 13 En SETUP MODE SETUP MODE You can set the following menu in Setup mode: • Power ON recall • Input mode • Auto input condition •Enable remote • Remote mode • MIC/MUSIC max level • MIC/MUSIC volume select • Initializing To set each menu above, set the corresponding controls as shown in the “Setup mode table” on page 15 according to the following procedure. 1 To enter Setup mode, turn off the main unit and press POWER while pressing KEY CONTROL and ECHO MODE. 2 Set KEY CONTROL and MUSIC according to the “Setup mode table” on page 15 to set desired menus and items. For Auto input condition, select the desired source before selecting the item. Set all settings you want to change before moving to step 3. 3 Press KEY CONTROL to enter the settings. “ ” blinks once when the settings are entered. 4 To terminate Setup mode, turn off the main unit. ¦ Menus in Setup mode 1. Power ON recall Select Last memory or Preset, to recall the settings of MIC volume/ECHO amount/MUSIC volume/ECHO MODE when the unit is turned on. Last memory*: The settings when the unit was turned off last are recalled. Preset: The settings saved to PRESET 1 are recalled. 2. Input mode Set Input mode to Auto or Manual. Auto*: The input source is set automatically. Manual: The input source is selected by INPUT. Source is selected in order of DVD, AUX**, TAPE, BGM. 3. Auto input condition Set the conditions for each source (DVD, AUX** and TAPE) for Auto Input mode described in 2. Audio*: The source is switched based on audio signal. Video: The source is switched based on video signal. Audio/Video: The source is switched based on audio or video signal. For only this menu, select desired source by INPUT before selecting the desired item. 4. Enable remote Enable or disable remote control. Enable*: The remote control is enabled. Disable: The remote control is disabled. 5. Remote mode Set the light receiving device. Front&Ext.*: Both the front panel and external remote control satellite receive the signal from the remote control. Front: Only the front panel receives the signal. Ext.: Only the external remote control satellite receives the signal. 6. MIC/MUSIC max level Set the maximum volume of MIC and MUSIC. 10*: No setting. 9 to 3: The maximum volume is set to the level indicated (2 to 0 cannot be set). 7. MIC/MUSIC volume select Select how MIC and MUSIC volumes increase/decrease (i.e., the volume curve) when the controls are turned. Pattern 1*: Steep curve Pattern 2: Less steep curve Pattern 3: Least steep curve, and is most suitable for fine adjustment. 8. Initializing Reset all the settings set in Setup mode to the defaults. Cancel: Initializing is not executed. Initialize: Initializing is executed. When pressing KEY CONTROL with MUSIC set to 3, Initializing is executed. * Default setting ** KMA-700 only 14 En SETUP MODE ¦ Setup mode table Menu KEY CONTROL Items/MUSIC 1. Power ON recall +1 Last memory: 1 Preset: 2 2. Input mode +2 Auto: 1 Manual: 2 3. Auto input condition +3 Audio: 1 Video: 2 Audio/Video: 3 Select desired source by INPUT. Example: DVD 4. Enable remote +4 Enable: 1 Disable: 2 5. Remote mode +5 Front&Ext.: 1 Front: 2 Ext.: 3 6. MIC/MUSIC max level –1 No setting: 10 Set to the indicated level: 9 to 3 Example: 3 7. MIC/MUSIC volume select –2 Pattern 1: 1 Pattern 2: 2 Pattern 3: 3 8. Initializing –5 Cancel: 1 Initialize: 3 OPERATION English 15 En TROUBLESHOOTING TROUBLESHOOTING If problems should occur, check the following table for simple remedies. If the problem still cannot be solved, please consult your dealer. Problems Possible causes Solutions No speaker sound is output at all. POWER is set to OFF. Set POWER to ON. The power cable is unplugged. Plug the power cable securely into the AC wall outlet. MUSIC is in the lowest position. Adjust MUSIC. The wrong music source is selected when Input mode is set to Manual in Setup mode. Select the correct music source with INPUT or set Input mode to Auto in Setup mode. Refer to “Input mode” on page 14. The sound is cut off due to a temperature rise in the unit. Turn the power off, then leave the ...
Este manual também é adequado para os modelos :Stereo - KMA-500 (5.52 mb)