Assessments - 3, GPA: 4
(
)
)
|
Facilidade de uso
If the RT information is being received, the received information is shown on the display. If the RT information isn't received, the " On the display. About CT(Clock Time) Sets the time of the RDS clock. DEMO DISC SELECTOR 1 2 3 TUNER BAND PROGRAM/SET MONO/ST TIMER ON/OFF TIMER/CLOCK CD PROGRAM/SET MONO/ST DEMO DISC SELECTOR 1 2 3 TUNER BAND PROGRAM/SET MONO/ST TIMER ON/OFF TIMER/CLOCK CD TAPE AUX CLA EDUCATE DRAMA TRAFFIC • Education • Drama-Radio serial, etc. • Culture-National or local culture including the religious problem, • Traffic information PTY DISPLAY PTY (1) DEMO DISC SELECTOR 1 2 3 TUNER BAND PROGRAM/SET MONO/ST TIMER ON/OFF TIMER/CLOCK CD TAPE AUX CLA PTY DISPLAY Press the RDS DISPLAY button to select the PS NAME. "PS NAME" appears on the display. If the PS information is being received, the PS name (BBC, AFO, NDR, etc.) is shown on the display. If the PS information isn't received, the original FM frequency is shown. Even though no RDS DISPLAY button is pressed, the reception of PS information makes the PS name displayed. To select the CT time, set the RDS DISPLAY button to CT MODE. "CT" lights on the top display for several seconds. The CT information will take up to 2 minutes to be decoded therefore the clock isn't displayed immediately. If there is no available CT information, "NO CT" is displayed. The CT RDS clock does not update the system clock. Display Program Type NEWS • News including an announced opinion and report AFFARIS • Several matters including a current incident, documentary, discussion and analysis. INFO • Information including weights and measures, returns and forecast, matters interesting the customer, medical information, etc. SPORT • Sports Press the PRESET/MANUAL DOWN or UP button to select the desired PTY MODE. If the station is transmitting no PTY information, 'NO PTY' shows on the display. When the PTY MODE is selected(The PTY MODE is shown in the display), press the PTY KEY once again to convert into PTY-SEARCH MODE and auto-search the station sequentially. If a station is found broadcasting required PTY MODE then the search stops and the stop is selected. GB 18 19 GB To obtain the best possible results from your mini-compact system, you must clean the following elements regularly: The outer casing The compact disc player The cassette players (heads, rollers and drive capstans) Always unplug the system from the wall outlet: Before cleaning it If you are not going to be using it for a long time Outer Casing Clean the outer casing regularly using a soft cloth and a light detergent. Do not use abrasive powders, liquids or aerosol cleaners. Never let any liquids get into the system. Compact Disc Player Before playing a compact disc, clean it with a special CD cleaning agent. Do not use the same cleaning agents as for vinyl LP records. Carefully wipe the disc from the centre outwards. Regularly clean the player with a special cleaning disc (available from your local dealer). Tape Decks Press STOP/EJECT( ) to open the cassette deck. Use a cotton bud and a special cassette cleaning agent to clean the: Head (1) Rollers (2) Drive capstans (3) If you will not be using the remote control for a long time, remove the batteries to prevent corrosion. Although your system is very hard-wearing, it should not be used in an excessively dusty environment or subjected to shocks or extreme heat (close to heating appliances or in direct sunlight, etc.). If the unit emits an unpleasant odour when in use, unplug it from the main supply and contact the after-sales service. Handle your compact discs with care. Always hold them by the edges to avoid leaving fingerprints on the shiny surface. When you have finished playing a compact disc, always put it back in its case. Do not fix paper or adhesive tape to the discs and do not write on the label. Clean them with a special-purpose cloth. Store your compact discs in a clean place, out of direct sunlight, where they will not be exposed to high temperatures. Always use compact discs marked. Check that the tape in the cassette is sufficiently taught. To prevent erasing a cassette that you wish to keep, remove the safety tab on the upper edge of the cassette. To record a cassette, where the tab has been broken, simply cover the opening with adhesive tape. When you have finished playing a cassette, always put it back in its case. Store your cassettes in a clean place, out of direct sunlight, where they will not be exposed to high temperatures. Avoid using 120-minute cassettes as they place unnecessary strain on the tape mechanism. It always takes a little time to become familiar with a new appliance. If you have any of the problems listed below, try the solutions given. They may save you the time and inconvenience of an unnecessary service call. If the above guidelines do not allow you to solve the problem, take a note of: The model and serial numbers, normally printed on the rear of the system Your warranty details A clear description of the problem ...