Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
1 • The first track of the first directory plays automatically. • Do not connect USB charging device to the USB connection port of the player, because it may cause damage to the product. 2 Connect the external USB storage device to your player. Select USB function by using the USB button. Playing USB You can play MP3 files by connecting to various external USB storage devices such as USB flash memory or HDD. time. Press the Stop ( ) button to stop playing. • Press the Stop ( ) button once to pause, and press the button twice to stop completely. • When selecting USB function, depending of the speed of the external USB storage device, reading (READ-IN) internal information can take several minutes. • When playing a USB device, recording or finding next track may introduce some delay. Especially with a mass storage device such as HDD, depending on the type and the number of files, the delay might be several minutes. • Even with the external USB storage devices of same capacity, depending on the speed of each product, the amount of operating time can vary. • If the external USB storage device supports only USB VER 1.1 and the access speed is slow, the recording may not work well or noise can be recorded. Delay • Depending on the type of external USB storage device, it may not work even if it’s connected to the player. • With external HDD, FAT format can be played, but not NTFS format. • With USB 2.0 HDD, connect to a separate power source. If it’s not connected to a separate power source, it may not work. • If memory of an external USB storage device is segmented into several parts, MP3 files of only the first hard disk drive can be played. • Regarding directories, up to fourth directory can be played. • DRM applied files are not played. Digital Rights Management: Technology and service that protect the profit and rights of copyright owners by disallowing unauthorized use of digital contents. • Even if the file name ends with .mp3, the file does not play if actual file format is MPEG layer 1 or 2. • Disconnect the external USB storage device only in safe removal mode(“USB REMOVE” display ON/OFF). Otherwise, internal file can be damaged. Press the Stop ( ) button more than 2 times to get into the safe removal mode. If you want to play files in the safe removal mode, disconnect and reconnect the external USB storage device. • USB hub will not be recognized. • Directory names are shown up to 14 letters, and MP3 file names up to 30 letters. Please be aware of the following before using USB. To stop playing Selecting a Track from USB Device You can select a desired directory and an MP3 file when it stopped. Before you begin! Connect the external USB storage device to your player. Select USB function by using the USB button. Press the Cursor , 1 buttons to move the directory. If you want to move the file, press the , button shortly. 2 • Each time you press the button, it will move to the directory before or after. • This function works only in the remote control. • It moves the file within the directory. • If you press the , button more times than the number of the files in the directory, it will move over to the next directory. USB 43 44 • The USB function of this product does not support all USB devices. For the information on the supported devices,pls see the page 62. 46 Listening to Radio You can listen to the chosen band (FM broadcast stations) by using either the automatic or manual tuning operation. 1 2 Tune in to the desired station. Press TUNER button. 1 2 Select a broadcast station. Press the STOP ( ) button to select PRESET and then press , button to select the preset station. Automatic Tuning 1 Press the TUNER button to select the desired band (FM). Press the STOP ( ) button to select "AUTO" and then press , button to automatically search the band. Automatic Tuning 2 Press STOP ( ) button to select MANUAL and then briefly press , to tune in to a lower or higher frequency. Manual Tuning • Each time the button is pressed, the sound switches between "STEREO" and "MONO". • In a poor reception area, select MONO for a clear, interference-free broadcast. Press MO/ST button to listen in Mono/Stereo. (This applies only when listening to an FM station.) Press the STOP ( ) button to select PRESET and then press button to select the preset station. Automatic Tuning 1 Remote Control Unit Main Unit TUNING Manual Tuning Press the STOP ( ) button to select "AUTO" and then press button to automatically search the band. Press the STOP ( ) button to select"MANUAL",Briefly press to increase or decrease the frequency incrementally. TUNING TUNING Automatic Tuning 2 To use high speed search Before you begin! Connect the external USB storage device to your player. Select USB function by using the USB button. You can search the part you want quickly during the play Press the , button. • Whenever you press the button, you can search backward or forward 2X .4X .8X .32X .OFF times quickly. • When you use the high speed search functi...