Assessments - 5, GPA: 4.2
(
)
)
|
Facilidade de uso
Lights To pause recording (Main unit only) 44 CD TUNER TAPE VIDEO/6ch IN BAND CD TUNER TAPE MD/DVD BAND Press the desired key. SET 55 NV-301 NV-701 CD010:02. SW REC RL (SW channel lights for NV-701 only) O Pressing the SET (¦) key pauses recording after leaving a non-recorded space of about 4 seconds. O If the key is pressed again in less than 4 seconds after it has been pressed, recording resumes from that instant. Lights SET SW REC RL (SW channel lights for NV-701 only) 36 Let's record 36 Let's record Tips in CD recording When recording CD tracks onto a tape, if you leave the cassette deck in record-pause mode beforehand, the cassette deck recording can be started at the same time as the CD starts to be played (synchronous recording function). 1Set the CD player in pause mode. 2Select the track to be recorded with the MULTI CONTROL (4, .) keys. (The CD player pauses at the beginning of the selected track.) 3Put the cassette deck in record-pause mode. (Press the SET (¦) key twice in succession.) 4Start playing the CD. (Synchronous recording starts.) O Recording stops when the 7 (stop) key is pressed. Basic section Beat cancel function In some cases, noise may be produced while recording AM (MW/LW) stations. When this occurs, press the TUNER (BAND) key while the unit is in the record pause mode to reduce or eliminate the noise for a better recording. TUNER BAND O Each press switches the beat cancel function on and off alternately. 37Special playback options for CD 37Special playback options for CD Listening in the desired sequence (program playback) Any titles on the discs in the tray can be listened to in the desired sequence. (Max. 32 steps) Select the “CD” input. 1 Check that the CD player is in the stop mode. 2 Select “CD Program Play”. 3 Enter track numbers in the order you want to play them. 1Select the disc. 2Select the track. 3Press the ENTER key. (To select other tracks, repeat steps 1 and 2 for each of the additional tracks.) If it is in play mode MENU DEMO SET ENTER MULTI CONTROL SET MULTI CONTROL SET MULTI CONTROL The following items can be selected by pressing the MULTI CONTROL keys repeatedly. “CD Program Play” (“Recording Options”) “Tape Options” “Audio Options” “Clock Options” “Surround Setup” (NV-701 only) +“CD Program Play” is scrolled in the display CDProgramP +“Select Disc/Track No.” is scrolled in the display Lights PGMSelectDisc/ Application sectionP-01D1T01P-01D1T?? . Even if you program a disc or track which does not exist in the tray, it is deleted automatically in playback. . Press the BACK key to return to the previous step and restart operation from there. . Up to 32 tracks can be programmed. When “Full” is displayed, no more tracks can be programmed. +“Press “ENTER” to Start, “MULTI” to Edit and Check” is scrolled in the display Press"ENTER Continued on next page... 38 Special playback options for CD 38 Special playback options for CD 4 Start programmed playback. ENTER (Playback starts from the first programmed track (program step number 1)) . Press the MULTI CONTROL keys during program playback to go to the previous or next programmed track. . When the left MULTI CONTROL key is pressed once during playback, the track being played will be played from the beginning. Press the TIME DISP. key on the remote control unit to switch the time display. Check the programmed tracks (and replace, add, or delete tracks as required). After a program has been made 1 Select “CD Program Play” for program editing. MENU DEMO SETMULTI CONTROL To check: MULTI CONTROL Application sectionP-01D1T01 O The programmed tracks are displayed in sequence. To replace a track in the program: MULTI CONTROL 1 Select the programmed disc or track to be replaced and press the SET key. SET 2 Select a disc or track to replace the disc or track selected above (step 3-1 and 2). P-10D2T07P-10D2T07 O The blinking item can be replaced. To add a track to the program: MULTI CONTROL 1 Select the display as shown on the left, and press the SET key. 2 Perform the same operation SET as in step 3-1 and 2 on the previous page. Display when 12 tracks have been programmed P-13D?T?? . The added track number is added to the end of the existing program. To delete a track from the program: MULTI CONTROL 1 Select the programmed disc of the step to be cleared and press the SET key. SET 2 Select “Clear” and press the SET key. P-12D1T03P-12Clear 2 Finish editing and start playback. ENTER ENTER To quit the program mode 1Select “CD Program Play”. MENU DEMO SET 2Press the MENU key. MENU Goes off DEMO PGM . If the MENU key is pressed during playback, normal playback in the order of tracks resumes from the current track. . The program mode can also be canceled by pressing the OPEN/CLOSE (0) key. 39Special playback options for CD 39Special playback options for CD Repeated playback Desired titles or discs can be played back repeatedly. Please note that repeat playback of a single track, single disc, or all discs is not possible during programmed p...
Este manual também é adequado para os modelos :Stereo - NV-301 (1.58 mb)