Assessments - 3, GPA: 5
(
)
)
|
Facilidade de uso
2. Hang the speaker by inserting the screw into the wall hanging hole on the upper rear side of the speaker. Check that the speaker are firmly mounted. Recommended speaker installation It is recommended that the surround speakers are in- stalled straight to the left and right of the listening position or slightly behind, at a height of about 1 meter higher than the listener’s ears. Each surround speaker should be installed so that the longer sides are horizontal. How to use the speaker stabilizer (cushions) When the surround speaker system installation is un- stable due to the floor condition, apply the provided sta- bilizer (cushions) on four positions on the bottom of each speaker. .Before installation, check the wall or ceiling well to confirm that it is strong enough to withstand the weight of the speaker. KENWOOD cannot assume the responsibility against accidents caused by the drop of speaker due to insufficient mounting strength or to any defect in installation. .The wall hanging screw is not provided. Please prepare a screw that can assure enough mounting strength according to the material and thickness (structure) of the wall where the speaker is to be hung. .If the material or thickness of a wall or ceiling cannot be confirmed, consult a professional specialized in installation. 8 System connection 8 System connection Connection with other components (optional or commercially-available equipment) Preparation section CAUTION Note on Connection Connect the components as shown in the diagram. Only plug the power cord into a power outlet once connec- tions are completed. The rear panel configuration is varies depending on the model (countries or area). DVD player, Video recorder, MD recorder, etc. DVD player, Video recorder, MD recorder, etc. DIGITAL OUT OPTICAL SUB WOOFER CENTER FRONT 6CH. INPUT SURROUND AUX INPUT L R LR DIGITAL OUT OPTICAL Optical-fiber cable (Provided with the MD recorder) DIGITAL OUT OPTICAL jack (Except for U.S.A. and Canada) Remove the cap and plug the optical-fiber cable. . Insert the optical-fiber cable straight into the connector until it clicks. . Be sure to attach the protection cap when the connector is not used. . Never bend or bundle up the optical- fiber cable. Digital input Audio output Audio center outOptical-fiber cable Audio subwoofer out Audio surround out *Audio front out *For U.K. and Europe (Front input only) Cap DVD player, etc. (6ch output) NoteNote When an external system component is connected, please read the instruction manual of the component as well. 9System connection Preparation section Lead the 75. coaxial cable connected to the FM out- door antenna into the room and connect it to the FM 75. terminal. FM outdoor antenna Use a commercially-available antenna adapter (a small-sized model). GND AM ANTENNA FM 75. Extremely low sound is played back powerfully. Super woofer Power cord To wall AC outlet (SW-500/optional) SUPER WOOFER PRE OUT DISC 1 DISC 2 DISC 3 STANDBY TIMER DISPLAY/DEMO MENU SELECTBACK ENTER SOUND CONTROL TUNING MODE MULTI CONTROL REC/ARM REVERSE MODE TAPE EQ. PHONES DISC SKIP OPEN/ CLOSE EX.BASS PUSH OPEN PUSH OPEN DECK PLAY A DECK REC/PLAY B VOLUME CONTROL 132476@ 09! 85. . ¤ . • . ‹ § . ¶ I/ DISC 1 DISC 2 DISC 3 STANDBY TIMER DISPLAY/DEMO MENU SELECTBACK ENTER SOUND CONTROL TUNING MODE MULTI CONTROL REC/ARM REVERSE MODE TAPE EQ. PHONES DISC SKIP OPEN/ CLOSE EX.BASS PUSH OPEN PUSH OPEN DECK PLAY A DECK REC/PLAY B VOLUME CONTROL 132476@ 09! 85. . ¤ . • . ‹ § . ¶ I/ 10 Controls and indicators Main unit #$%^&*() .™ . Preparation section CD player unit # STOP (7) key . Operation key for the CD player and cassette deck. ) CD (6) key Press to select the CD and start playback. . . Disc tray Three discs can be stored. ) . DISC SELECTOR keys . The disc for playback (or recording) is selected. . DISC SKIP key . The disc for playback (or recording) is selected.This is also used for loading CDs onto the disc tray. § OPEN/CLOSE (0) key ) The disc tray is opened and closed. 11Controls and indicatorsControls and indicators Receiver 1 STANDBY indicator ^ The indicator lights up when the power is set to the STANDBY mode. 2 STANDBY ( ) key ^ STANDBY (POWER) key (For U.S.A. Canada) ^ Power ON/OFF switching is executed. 3TIMER indicator T The indicator lights up when the power is set to the STANDBY mode after having activated a timer pro gram. 4 DISPLAY/DEMO key 4@ Switches the displayed information. 5 TUNING MODE key § Switches the tuning mode. 6 SOUND CONTROL key y Used in combination with the MULTI CONTROL jog dial to set up the equalizer pattern, DSP play or surround play. 7 MENU key % Press to switch the mode set with the MULTI CONTROL jog dial ON or OFF. 8 MULTI CONTROL (4.) jog dial %.§ Turn this dial to select optimum modes according to the desired operations. When the CD input is selected, this dial is used to skip tracks. When the TUNER input is selected, this dial is used to select a station. When the TAPE input is selected, this dial is used to fa...
Este manual também é adequado para os modelos :Stereo - XD-803 (1.33 mb)
Stereo - XD-853 (1.33 mb)