Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
The supplied batteries are intended for use in operation checks. Therefore, their lives may be shorter than ordinary batteries. 2. When the remote-controllable distance gets shorter than before, replace both batteries with new ones. 3. Malfunction may occur if direct sunlight or the light of a high-frequency lighting fluorescent lamp enters the remote control light sensor. In such a case, change the system installation position to prevent the malfunction. Normal play (TRACK mode) Use the following procedure to play a CD in the original order of tracks from track No. 1. DP-5090/4090 (En) REMOTE CONTROL UNIT RC-P0505 : Keys and control used in the operations described on this page. Playing tracks in order from track No. 1 1POWER -ON .OFF Press the POWER switch to ON. OPlayback starts when a disc has been loaded. 2 2 Load a disc. 1Open the door. 3Close the door. ODo not touch the played side of disc. OLoading two discs together will cause malfunctioning. OPlace the disc properly along the groove on the tray. (If the disc is not placed horizontally, malfunction will result.) OA single CD (8 cm disc) can also be played. OOrdinary CD single (8 cm) disc adapters sold in audio stores cannot be used with this unit. OIn the case of a CD-TEXT disc, the disc’s title is scrolled on the display. 0 2Place a disc. Disc tray 0 COLESLabel side 3 3 Start playback. 6 10:132Lights up. Track NO. being played Elapsed time of track being played OIn the case of a CD-TEXT disc, the track’s title is scrolled on the display. What is then displayed is in accordance with the TEXT DISPLAYmode. # To pause playback To stop playback OEach press pauses and plays the CD alternately. 6 10Lights up. 7 DP-5090/4090 (En) 11 REMOTE CONTROL UNIT RC-P0505 : Keys and control used in the operations described on this page. Playback from desired track Remote control unit only Select the desired track No. REMOTE CONTROL UNIT RC-P0505 1 2 3 4 5 6 7 8 9 0 +10 Press the numeric keys as shown below.... To enter track No. 23 : 003 To enter track No. 40 : 0000) OPlayback starts from the selected track and continues on the subsequent tracks. Skipping tracks . 4To skip backward To skip forward OThe track in the direction of the pressed key is skipped, and the selected track will be played from the beginning. OWhen the 4 key is pressed once during playback, the track being played will be played from the beginning. Searching Backward search 1 A SEARCH Forward search OPlayback starts from the position where the key is released. What is the “normal play TRACK mode”? The normal play TRACK mode refers to the state in which the PGM, EDIT and RANDOM mode displays are off. To set the unit to the TRACK mode: Press the P.MODE key when the ”PGM“ or ”EDIT“ display is lighted. Press the RANDOM key when the ”RNDM“ display is lighted. GP0M1DETINRMD Goes off. Goes off.Goes off. REMOTE CONTROL UNIT RC-P0505 P.MODE RANDOM Searching for tracks by title (TITLE SEARCH) DP-5090/4090 (En) In the case of a CD-TEXT disc, the tracks to be heard can be searched by title. REMOTE CONTROL UNIT RC-P0505 PreparationOLoad a disc (CD-TEXT support) in the CD player. OCheck that the unit is in the normal play TRACK mode. ! : Keys and control used in the operations described on this page. 1 1 Press the TITLE SEARCH key. Blinks. 2TITLE SEARCH REMOTE CONTROL UNIT RC-P0505 Select the name of the track (title) to be heard. To stop the search, press the TITLE SEARCH key again. 10TTIELACBEDFTrack title OIn the case of a non-CD-TEXT disc, the ”NO CD TEXT“ display will appear for approx. 3 seconds. REMOTE CONTROL UNIT RC-P0505 4 . The track number skips forward. The track number skips backward. 20TTIELXZY If no keys are operated for more than a second, the track title is scrolled on the display. 3 3 Start playback. REMOTE CONTROL UNIT RC-P0505 6 TTIELXZY . The letters move toward the left. 20:132 Track NO. being played Elapsed time of track being played OWhat is displayed will differ depending on the item which has been selected by TEXT DISPLAY. # Display scrolling Some track titles contain so much text information that the full titles will not fit on the display. In cases like this, the letters on the display move from right to left so that the non-visible part of the title is revealed. This type of display movement is known as “scrolling display.” Display example 01A01MNOPQ... BCDEFGHIJKLMNOPQ... Scroll displaya Displays DP-5090/4090 (En) Time display on CD player (TIME DISPLAY) Remote control unit only Each press of the TIME DISPLAY key changes the displayed contents. 1 12: Elapsed time of track being played :3 2 -2:7 : Remaining time of track being played 3 3 23:5: Elapsed time of entire disc (T lights up.) 4T 4 -62T : Remaining time on entire disc (T lights up.) 3 :5 OOnly the display 1 and 2 will be displayed in RANDOM and EDIT modes. REMOTE CONTROL UNIT RC-P0505 TIME DISPLAY Selecting the text information display (TEXT DISPLAY) In the case of a CD-TEXT disc, the displays shown below can be In the sto...
Este manual também é adequado para os modelos :Stereo - DP-4090 (505.25 kb)