Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• [On] – Enable the screen saver. • [Off] – Disable the screen saver. 4:3 Pan Scan (PS) 4:3 Letter Box (LB) 16:9 (Wide Screen) English EN [Night Mode] Make loud sound level sof ter and soft sound level louder so that you can watch the DVD movies at a low volume, without disturbing others. • [On] – enjoy quiet viewing at night (DVDs only). • [Off ] – enjoy surround sound with its full dynamic range. [Audio Sync] Set the default delay time for audio output when you play a video disc. Press / to set the delay time. Press OK / to confirm and exit. Video setup On [Video Setup Page], you can set the following options: [Component] Set the video output according to the video connection. If the composite connection is used, this setting is not required. • [S - Video] – If the S-Video connection is used, select this option. • [Pr/Cr Pb/Cb Y] – If the component connection is used, select this option. • [RGB]– If the SCART connection is used, select this option. [TV Mode] Select the video output mode. To select the progressive scan mode, ensure that you have connected a progressive scan TV and set [Component] to [Pr/Cr Pb/Cb Y]. • [Progressive] – For progressive scan TV: turn on the progressive scan mode. • [Interlace] – For ordinary T V: turn on the interlace mode. [Picture Setting] > [Picture Setting Setup] Customize picture color settings. 26 EN [HDMI SETUP] > [HDMI] Turn on or off HDMI output. • [Auto] – Select audio output through the HDMI connection automatically. • [Off ] – Disable HDMI audio output (not recommended). [HDMI SETUP] > [Resolution] Select the HDMI video output resolution that is compatible with your TV display capability. Tip • This option is only available when the [HDMI] option is set to [Auto]. • In the resolution options, “i” denotes interlace and “p” denotes progressive. Preference setup On [Preference Page], you can set the following options: [TV Type] Change this setting if the video does not appear correctly. By default, this setting matches the most common setting for TVs in your countr y. • [PAL] - For T V with PAL color system. • [Auto] - For T V that is compatible with both PAL and NTSC . • [NTSC] - For TV with NTSC color system. [Audio] Select the preferred audio language for disc play. [Subtitle] Select the preferred subtitle language for disc play. [Disc Menu] Select the preferred disc menu language. Note • If the language you have set is not available on the disc, the disc uses its own default language. • For some discs, the subtitle/audio language can only be changed from the disc menu. [Parental] Restricts access to discs that are unsuitable for children. These types of discs must be recorded with ratings. Press OK / . Select a rating level, then press OK / . Press the numeric keys to enter the password. Note • Rated discs above the level you set in [Parental] require a password to be played. • The ratings are country-dependent. To allow all discs to play, select [8 ADULT]. • Some discs have ratings printed on them but are not recorded with ratings. This function has no effect on such discs. Tip • You can set or change the password. (See “Preference setup - Password setup”.) [Default] Resets all the settings of this unit to factor y default, except for the password and parental settings. [Password Setup] > [Password Setup Page] > [Password Mode] This setting allows you to enable/disable the password for parental control. If the password is enabled, when you play a prohibited disc, this 4-digit password is required. • [On] - Enable the password for parental control. • [Off ] - Disable the password for parental control. [Password Setup] > [Password Setup Page] > [Password] You can change password here. The default password is 1234. • [Change] 1) Press the numeric keys to enter ‘1234’ or your last set password at [Old Password] field. 2) Enter the new password at [New Password] field. 3) Enter the new password again at [Confirm PWD] field. 4) Press OK / to exit the menu. Note • If you forget the password, enter ‘1234’ before you set a new password. English EN 27 7 Tune to FM radio stations 1 Ensure that you have connected and fully extended the supplied FM antenna. 2 Press TUNER. 3 Press and hold / . 4 When the frequency indication star ts to change, release the button. » The FM tuner tunes to a station with strong reception automatically. 5 Repeat steps 3-4 to tune to more stations. To tune to a weak station: Press / repeatedly until you find optimal reception. Program radio stations automatically Note • You can program a maximum of 20 preset radio stations. 1 Press / to select a preset number to star t programing. 2 Press and hold ANGLE/PROG for 2 seconds to activate automatic programming. » [AUTO] (auto) is displayed briefly. » All available stations are programmed in the order of waveband reception strength. » The last programed radio station is broadcast automatically. Program radio stations manually Note • You can program a maximum of 20 preset radio stations. 1 Tune to a radio...