Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
p PROG • Program tracks. • Program radio stations. q • Mute or restore volume. r MENU • Access iPod/iPhone/iPad menu. s SLEEP/TIMER • Set the sleep timer. • Set the alarm timer. English abcdfeghijklmpqrson EN 3 Get started Caution ••Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the rear of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect speakers Note ••For optimal sound, use the supplied speakers only. ••Connect only speakers with impedance that is the same or higher than the supplied speakers. Refer to the Specifications section of this manual. Insert the speaker wires completely into the speaker input sockets on the back of the unit. Connect FM antenna Tip ••For optimal reception, fully extend and adjust the position of the antenna. Connect the supplied FM antenna to the FM ANTENNA jack on the main unit. Connect power Caution ••Risk of product damage! Ensure that the power voltage corresponds to the voltage printed on the back or underside of the apparatus. ••Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. ••Before connecting the AC adaptor, ensure you have completed all other connections. Connect the power adaptor to: • the AC MAIN~ jack on the main unit. • the wall outlet. RAUX INLANTENNAFMSPEAKER OUTAC MAIN ~ L+ L- R+ R- AC MAIN ~ EN Prepare the remote control Caution ••Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. To insert the remote control battery: 1 Open the battery compartment. 2 Insert 2 AAA batteries with correct polarity (+/-) as indicated. 3 Close the battery compartment. Note ••If you are not going to use the remote control for a long time, remove the batteries. ••Do not use old and new or different types of batteries in combination. ••Batteries contain chemical substances, so they should be disposed of properly. Set clock 1 In standby mode, press CLOCK/ DISPLAY on the remote control to activate the clock setting mode. »»The hour digits are displayed and begin to blink. 2 Press / to set the hour. 3 Press CLOCK/DISPLAY. »»The minute digits are displayed and begin to blink. 4 Press / to set the minute. 5 Press CLOCK/DISPLAY to confirm. Turn on Press . »»The unit switches to the last selected source. Switch to standby Press again to switch the unit to standby mode. »»The clock (if set) appears on the display panel. Switch to ECO standby mode: Press and hold for more than 3 seconds. »»[ECO STANDBY] (Eco standby) is displayed for 3 seconds and then disappeared. Tip ••The unit switches to Eco Power Standby mode after 15 minutes in standby mode. Switch between standby mode and ECO standby mode: Press and hold for more than 2 seconds. English abc EN 4 Play Play a disc 1 Press SOURCE repeatedly to select CD source. 2 Press to open the disc compartment. 3 Insert a disc with the printed side facing upward. 4 Press to close the disc compartment. 5 Play starts automatically.If not, press . Play from USB Note •• Ensure that the USB device contains playable audio content. 1 Insert the USB device into the socket. 2 Press SOURCE repeatedly to select the USB source. »»Play starts automatically. If not, press . • To select a folder, press PRESET +/-. • To select an audio file, press /. Play iPod/iPhone/iPad When the iPod/iPhone/iPad is docked on this Micro System, you can listen to music from the speakers. Note ••No audio output from the headphone jack in this situation. Compatible iPod/iPhone/iPad Apple iPod, iPhone and iPad models with a 30-pin dock connector: • iPod classic, iPod touch, iPod nano, iPod 5th generation (video), iPod with color display, iPod mini. • iPhone, iPhone 3G, iPhone 3GS, iPhone 4. • iPad (WiFi), iPad (3G). Play an iPod/iPhone/iPad Note ••When an iPod/iPhone/iPad player is loaded, the unit switches to iPod source automatically. 1 Push to open the dock compartment. 2 Place the iPod/iPhone/iPad player in the dock. Press SOURCE repeatedly to select DOCK source. EN »»The connected iPod/iPhone/iPad plays automatically. • To pause/resume play, press . • To skip to a track, press /. • To search during play, press and hold /, then release to resume normal play. Charge the iPod/iPhone/iPad Note ••iPod with color display, iPod classic, and iPod with video are not compatible with dock charging. When the unit is connected to power, the docked iPod/iPhone/iPad begins to charge. Listen to radio Tune to a radio station 1 Press SOURCE repeatedly to select the tuner source. 2 Press and hold / for more than 2 seconds. »»[SEARCH] (search) is displayed. »»The radio tunes to a station with strong reception automatically. ...