Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
• The timer continues to operate in Power Saving Mode. Viewing information about the disc in the display You can check the playing time and remaining time of the current track or that of the disc. Checking the remaining time Press DISPLAY during Normal Play. Each time you press the button, the display changes cyclically as follows: Current track number and elapsed playing time t Current track number and remaining time t Remaining time of the disc1) t Clock display (for eight seconds) t Bass level (for eight seconds) t Treble level (for eight seconds) 1) “– –.– –” appears in Program Play mode. Note When fast forward or fast reverse is performed, elapsed playing time and remaining time of the track may not be displayed accurately. Checking the total playing time Press DISPLAY repeatedly in stop mode. Each time you press the button, the display changes cyclically as follows: x Normal Play mode TOC display* t Clock display (for eight seconds) t Bass level (for eight seconds) t Treble level (for eight seconds) * TOC = Table of Contents; displays total number of tracks on the disc, and total playing time of the disc x Program Play mode The last track number of the program and the total playing time t Total track number of the program (for eight seconds) t Clock display (for eight seconds) t Bass level (for eight seconds) t Treble level (for eight seconds) Display 23GB Viewing the tuner information in the display Press DISPLAY while listening to the radio. Each time you press the button, the display changes cyclically as follows: Station name1) t Preset number2) and frequency t Clock display (for eight seconds) t Bass level (for eight seconds) t Treble level (for eight seconds) 1) European model only 2) Preset number is displayed only if you preset radio stations (page 13). Checking the DAB station information You can check the status of this tuner and the information about the program using the display. Press DISPLAY repeatedly when tuning in a DAB station. Each time you press the button, the display changes cyclically as follows: Service component label t Preset number + Frequency (for two seconds)1) t Channel label + Frequency (for two seconds) t DLS (Dynamic Label Segment)2) t Ensemble label (until scroll ends)3) t Clock display (for eight seconds) t Bass level (for eight seconds) t Treble level (for eight seconds) 1) Preset number is displayed only if you preset radio stations (page 13). 2) If there is no information in a service component, “NO TEXT” appears. 3) If an ensemble does not have a label, “NO LABEL” appears. Note When “STEREO” appears in the display, the current programme is broadcasted in the stereo/joint (intensity) stereo mode. 24GB Optional Components Hooking up optional components To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component. From the audio output jacks of an optional analog component Optional analog component Optional Components A AUDIO IN jacks Use audio cords (not supplied) to connect an optional analog component (MiniDisc player/ recorder or VCR, etc.) to these jacks. You can then record or listen to the sound from the component through this system. Notes • Before connecting or disconnecting the audio cord (not supplied), press VOLUME – repeatedly (or turn the VOLUME control on the unit counterclockwise) to turn down the volume. • Disconnect the audio cords when not using optional components. 25GB Listening to audio from a connected component 1 Connect the audio cord. See “Hooking up optional components” on page 25. 2 Press FUNCTION repeatedly until “AUDIO IN” appears. 3 Start playing the connected component. Recording audio from a connected component 1 Connect audio cord. See “Hooking up optional components” on page 25. 2 Start recording manually. See “Recording on a tape manually” on page 18. 26GB Troubleshooting Problems and remedies Should you encounter a problem with your system, do the following: 1 Make sure the mains lead and speaker cords are correctly and firmly connected. 2 Find your problem in the troubleshooting checklist below and take the indicated corrective action. If the problem persists after doing all of the above, consult your nearest Sony dealer. When the ?/1 indicator flashes Immediately unplug the mains lead and check the following items. • If your system has a voltage selector, is the voltage selector set to the correct voltage? Check the voltage for your region, then make sure the voltage selector is set correctly. • Are the + and – speaker cords shortcircuited? • Are you using the supplied speakers? • Is anything blocking the ventilation holes on the rear of the system? Check all the above items and fix any problems found. After ?/1 indicator stops flashing, reconnect the mains lead and turn on the system. If the indicator still flashes, or if the cause of the problem cannot be found even after checking all the above items, consult your nearest Sony dealer. General “– –:– –” appears i...