Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
Program radio stations automatically You can program a maximum of 20 preset radio stations. 1 In the tuner mode, press and hold PROG for 2 seconds to activate automatic program mode. » [AUTO] (auto) is displayed. » All available stations are programmed in the order of waveband reception strength. » The first programmed radio station is broadcast automatically. Program radio stations manually You can program a maximum of 20 preset radio stations. 1 Tune to a radio station. (See “Tune to a radio station” section.) 2 Press PROG to activate program mode. » [PROG] blinks on the display. 3 Press PRESET/ALBUM +/- to allocate a number to this radio station, then press PROG to confirm. » The preset number and the frequency of the preset station are displayed. 4 Repeat the above steps to program other stations. Tip • To over write a programmed station, store another station in its place. Select a preset radio station 1 In tuner mode, press PRESET/ALBUM +/to select a preset number. » The preset radio station is broadcasted. Tip • Position the antenna as far as possible from TV, VCR or other radiation source. • For optimal reception, fully extend and adjust the position of the antenna. English EN 17 9 Other features Set the sleep timer This unit can switch to standby automatically Set the alarm timer after a set of time. Note • This player can set the Disc, Tuner, or iPod/ iPhone as the source for the alarm timer. 1 Make sure that you have set the clock correctly. 2 In standby mode, press and hold TIMER. 3 Press DISC, TUN, or iPhone/iPod to select a source. 4 Press TIMER to confirm. » The hour digits are displayed and begin to blink. 5 Press / to set the hour. 6 Press TIMER to confirm. » The minute digits are displayed and begin to blink. 7 Press / to set the minute. 8 Press TIMER to confirm. » The timer is set and activated. Activate and deactivate alarm timer 1 In the standby mode, press SLEEP/TIMER repeatedly to activate or deactivate timer. » If timer is activated, the display shows . »If timer is deactivated, disappears. Tip • Alarm timer is not available in MP3 LINK mode. • If the DISC/iPod/iPhone source is selected but no disc inser ted or no iPod/iPhone connected, the system will switch to the tuner source automatically. 1 When the unit is on, press SLEEP repeatedly to select a set of time (in minutes). » When sleep timer is activated, the display shows . To deactivate sleep timer1 Press SLEEP repeatedly until “off ” is displayed. » When sleep timer is deactivated, disappears. Listen to an external device You can also listen to an external audio device through this unit. 1 Press AUX to select MP3 link source. 2 Connect the supplied MP3 link cable to: • the MP3 LINK jack on this unit • the headphone jack on the device 3 Star t to play the device. (See the device user manual) 18 EN 10 Product information Note • Product information is subject to changewithout prior notice. Specifications Amplifier Rated Output Power 15W RMS Frequency Response 60 - 16kHz, ±3dB Signal to Noise Ratio >65dBA Aux Input 0.5 V RMS 20kohm Disc Laser Type Disc Diameter Suppor t Disc Semiconductor 12cm/8cm CD-DA, CD-R, CDRW, MP3-CD Audio DAC Total Harmonic 24Bits / 44.1kHz <1% Distor tion Frequency Response 60Hz -16kHz (44.1kHz) S/N Ratio >65dBA Tuner-Specs Tuning Range FM: 87.5 - 108MHz Tuning grid 50KHz Sensitivity - Mono, 26dB S/N Ratio<22 dBf - Stereo, 46dB S/N Ratio <43 dBf Search Selectivity >28dBf Total Harmonic Distor tion <3% Signal to Noise Ratio >55dB Speakers Speaker Impedance 4ohm Speaker Driver 3.5” Sensitivity >82dB/m/W General information AC power 230-240V~ 50Hz Operation Power 25W Consumption Standby Power <2W Consumption Dimensions - Main Unit (W x H x D)209 x231 x 147mm - Speaker Box (W x H x D) 146 x 228 x 160mm Weight -With Packing6.6 kg - Main Unit1.95 kg - Speaker Box 2 x 1.2 kg Supported MP3 disc formats • ISO9660, Joliet • Maximum title number: 999 (depending on file name length) • Maximum album number: 99 • Supported sampling frequencies: 32 kHz, 44.1kHz, 48 kHz • Suppor ted Bit-rates: 32-256 (kbps), variable bit rates English EN 19 11 Troubleshooting Caution • Never remove the casing of this apparatus. To keep the warranty valid, never tr y to repair the system yourself. If you encounter problems when using this apparatus, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips web site (philips.com/welcome). When you contact Philips, ensure that the apparatus is nearby and the model number and serial number are available. No power • Ensure that the AC power cord of the unit is connected properly. • Ensure that there is power at the AC outlet. • As a power-saving feature, the system switches off automatically 15 minutes af ter track play reaches the end and no control is operated. No sound or poor sound • Adjust the volume. • Disconnect the headphones. • Check that the speakers are connected correctly. • Check if the stripped speaker wires are clamped. Left an...