Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
. You may be asked to grant permission for "AVRCP" or "Remote Control" functions.You should grant this permission for complete connection. . The name of the paired device will appear on the display panel after successful pairing. 8 Repeat the above steps if you want to pair more Bluetooth-enabled devices with the system. To disconnect a paired device . Switch off the device or move it beyond the communication range. . “DISCONNECT PHONE” or “DISCONNECT STEREO” will appear on the display panel of the system briefly when the connection is terminated. . You will hear a long beep from the system. To disconnect all paired devices . Press and hold on for more than 5 seconds until “DISCONNECT ALL” appear on the display panel of the system. . No message on the display panel indicates that there is no active connection to terminate. Notes: – The system can store pairing information of up to 7 devices.You do not need to pair a device every time you want to reconnect it with this system. As long as the system is powered on and the reconnection function of device is activated, the paired device will reconnect to the system whenever it comes into the communication range. – If an eighth device is paired, the pairing information of the first paired device will be overwritten. –“FAILED” will appear on the display panel of the system if no pairing is made within one minute. In this case, please refer to the related items in “Troubleshooting” for a solution to the problem. Operating a connected Bluetooth-enabled device through the system BTM177 is designed with a built-in high-quality microphone (speakerphone) allowing you to make or end calls of a connected mobile phone through this system. Notes for the speakerphone: –To achieve the best performance from your system, please follow these guidelines for placement and use of the speakerphone: 1) Choose a quiet environment. The microphone on the unit will pick up your voice, as well as some amount of background noise. Using this unit in a quiet place will make it easier for the party you are calling to hear your voice. 2) Minimize echo in the room. Using this unit in a room that has carpets, drapes and soft furnishings will give better performance than using in a room with highly reflective surfaces such as tile, concrete and glass. 3) Keep in range of the microphone. The closer you speak to the microphone, the more clearly your voice will be heard. If you are within 2 meter of the microphone you may talk at a normal volume and your voice should be clear to the party you are calling. If you move beyond 3 meter, you will need to raise your voice in order to be heard clearly. Use beyond 5 meter range is not recommended. 4) Choose a sensible listening volume. This unit is designed to perform best at moderate listening levels. If you increase the volume too much, you may begin to hear an echo.The best listening level is normally a maximum volume level of 20. 22 Bluetooth Operation 5) Place the unit in line with your mouth. If you will be using this unit while sitting down, place the unit at tabletop level, in line with the level of your mouth. Placing the unit on a high cabinet or on the floor may reduce the pick-up of the microphone. Receiving a call through the system (for a connected mobile phone supporting the HFP and HSP profiles) When there is an incoming call to the connected mobile device, you will hear an incoming call aler t tone from the speakers of the system and the display panel of the system will show “IN CALL” and the calling number (if available). In this case, you can: . Press PAIRING on the top of the system or the remote control to accept the call. . The display panel of the system will show “CALLING”. . Press on the top of the system or the remote control to reject the call. . The display panel of the system will show “CALL END”. . Press and hold PAIRING on the top of the system or the remote control to transfer sound from system speakers to the mobile phone or conversely. . The display panel of the system will show “TRANSFER”. Listening to music from the connected device through the system (for a device supporting the A2DP profile) BTM177 allows you to connect your A2DP capable device and stream high-quality stereo music over Bluetooth to the system for playback. If the connected device also supports the AVRCP profile, you can also control music playback of the connected device from the system or its remote control: . Press EA to star t playback. . Press EA again to pause playback. . Press S/T on the top of the system (or . / ™ on the remote control) to select a track. . Press 9 to stop playback. English Holding a call through the system (for a connected mobile phone supporting the HFP and HSP profiles) . During a call, you can press MUTE on the remote control to mute the microphone (speakerphone) so that the other par ty cannot hear your voice. . The display panel of the system will show “MIC MUTE”. To resume sound input of the microphone . Press MUTE on the ...