Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
. SHUFFLE – to playback all tracks/favorites in random order. . REPEAT – to playback track/disc/favorites repeatedly. . INCR. SURR. fi DIGITS 0 – 9 – to activate or deactivate the surround sound (numbers consisting more than two figures must be effect. keyed in within 2 seconds.) ¤ for CD, CONNECT, PC-LINK ... to select a SLEEP – to activate, deactivate or set the sleep timer track. function. for OPTIONS…for text/number editing. ‹ for Tuner ............. to select a favorite radio station. DIM – to select different brightness for the display Notes for remote control: screen : DIM 1, DIM 2, DIM 3 or DIM OFF. – First, select the source you wish to MUTE › control by pressing one of the source select keys on the remote control (CD or TUNER, for example). – Then select the desired function (E, i, e for example). – to interrupt or resume sound reproduction. 14 3139 115 21471 pg 001-036/i200/37-Eng 14 4/22/02, 7:30 PM 15 English 3139 115 21471 Basic Functions INCR. SURR. SLEEP DIM 123 SHUFFLEREPEATALL MW LWAMFM NEWS REC 1 2 3 NAVIGATE PLAY FAVORITES OPTIONS CONNECT PC-LINK CD TUNER AUX VIEW WOOX TREBLE BASS SOUND JOG FAVORITES STANDBY•ON ECO POWER MICRO HIFI SYSTEM RESUME CANCEL OK BACK ENTER iR • •• • IMPORTANT! Before you operate the system, complete the preparation procedures. Plug and Play Plug and Play allows you to store all available radio stations automatically. First time setup/power up 1 When you turn on the power supply, "PRESS PLAY TO INSTALL TUNER" is displayed. 2 Press 2 to start installation. . "INSTALLING TUNER" is displayed, followed by "AUTO PROGRAM IN PROGRESS...". . All available radio stations with sufficient signal strength will be stored automatically, starting from FM and followed by AM band. . When all the available radio stations are stored or the memory for 40 presets is used, the last preset radio station will be played. To reinstall Plug and Play 1 In standby mode, press and hold 2 until "PRESS PLAY TO INSTALL TUNER" is displayed. 2 Press 2 again to start installation. . All previously stored radio stations will be replaced. To exit without storing the Plug and Play Press C. . If you do not complete the Plug and Play installation, the function will be restarted when you next turn on the power supply again. Notes: – When the power is turned on, the disc tray may open and close to initialize the system. – If no stereo frequency is detected during Plug and Play, "CHECK ANTENNA" is displayed. – During Plug and Play, if no button is pressed within 15 seconds, the system will exit Plug and Play mode. pg 001-036/i200/37-Eng 15 4/22/02, 7:30 PM Basic Functions English Switching the system on In standby mode . Press STANDBY ON to switch on the last selected source. . Press PC-LINK, CONNECT, CD, TUNER, or AUX to select the desired source. In Eco Power Standby mode . Press STANDBY ON on the system. . Press PC-LINK, CD, TUNER, CONNECT or AUX on the remote control. Switching the system to standby mode . Press STANDBY ON (or B on the remote control). . The clock will appear on the display when the system is in standby mode. Switching the system to Eco Power standby mode (<0.5W) . Press and hold STANDBY ON (or B on the remote control) for more than three seconds. . "ECO POWER MODE ECO POWER MODEECO POWER MODEECO POWER MODEECO POWER MODEECO POWER MODE" is displayed, then the display screen will go blank. . The low power LED will be lighted. Power saving automatic standby As a power-saving feature, the system will automatically switch to Standby mode if you do not press any buttons within 30 minutes after a disc has stopped playing. Dim mode You can select the desired brightness for the display. . Press DIM on the remote control repeatedly to select DIM 1, DIM 2, DIM 3 or DIM OFF display mode. . DIM and the corresponding dim level will appear on the display, except for DIM OFF mode. DIM LEDs mode 1 off 2 on 3 off OFF on Volume control Adjust SOUND JOG (or press VOLUME +/-on the remote control) to increase or decrease the volume level. . "-XX dB -XX dB-XX dB-XX dB-XX dB-XX dB" is displayed. "XX XXXXXXXXXX" denotes the volume level. To listen through the headphones . Connect the headphones plug to the n socket at the front of the system. . The speakers will be muted. To switch off the volume temporarily . Press MUTE on the remote control. . Playback will continue without sound and "MUTE MUTEMUTEMUTEMUTEMUTE" is displayed. . To restore the volume, press MUTE again or increase the volume level. 16 3139 115 21471 pg 001-036/i200/37-Eng 16 4/22/02, 7:30 PM Basic Functions Sound control For optimal sound listening, you are only able to select BASS/TREBLE or wOOx at a time. wOOx There are three wOOx settings to enhance the bass response. . Press wOOx repeatedly to select the next wOOx level or switch the wOOx effect off : wOOx 1, wOOx 2, wOOx 3 or wOOx OFF. . WOOX and the corresponding wOOx level will appear on the display, except for wOOx OFF mode. Notes: – When switched off the wOOx effect, the last Bass/Tr...